Compartment Mixing Model in a Stirred Tank Equipped Dual Rushton Turbine
Authors: not saved
Abstract:
This article doesn't have abstract
similar resources
A Study on Liquid-liquid Mixing in a Stirred Tank with a 6-Blade Rushton Turbine
The turbulent flow field generated in a baffled stirred tank was computed by large eddy simulation (LED) and the flow field was developed using the Sliding Mesh (SM) approach. In this CFD study, mixing times and power number have been determined for a vessel agitated by a 6-blade Rushton turbine. The predicted results were compared with the published experimental data. The satisfactory results ...
full textComparison of mixing between single- and bubbly two-phase systems in a Rushton stirred tank
Mixing is a widely practiced operation to effect distribution, intermingling and homogeneity of matter. Stirred tanks with different geometries (such as in main container tanks, impellers, baffles, etc.) are also widely used to mix different materials. The forces applied by impellers develop overall circulation or bulk flow. Superimposed on this flow pattern, there are turbulent eddies and also...
full textData on the mixing of non-Newtonian fluids by a Rushton turbine in a cylindrical tank
The paper focuses on the data collected from the mixing of shear thinning non-Newtonian fluids in a cylindrical tank by a Rushton turbine. The data presented are obtained by using Computational Fluid Dynamics (CFD) simulation of fluid flow field in the entire tank volume. The CFD validation data for this study is reported in the research article 'Numerical investigation of hydrodynamic behavior...
full textNumerical Comparison of Rushton Turbine and CD-6 Impeller in Non-Newtonian Fluid Stirred Tank
A computational fluid dynamics simulation is done for non-Newtonian fluid in a baffled stirred tank. The CMC solution is taken as non-Newtonian shear thinning fluid for simulation. The Reynolds Average Navier Stocks equation with steady state multi reference frame approach is used to simulate flow in the stirred tank. The turbulent flow field is modelled using realizable k-ε turbulence model. T...
full textCfd Study of Mixing Process in Rushton Turbine
This paper reports on the CFD study of macro-mixing process of Rushton turbine in stirred tank. The code for mixing calculation is developed in the commercial CFD code CFX4.3. Mixing process simulation on different calculation method, different turbulent model and different tracer adding and detecting position are calculated. The simulation is three-dimensional and the impeller region is explic...
full textComputational Flow Modelling of Dual Rushton Impeller Stirred Vessels
Flow in baffled stirred vessels involve interactions between flow around rotating impeller blades and stationary baffles. When more than one impeller is used, which is quite common in practice, the flow complexity is greatly increased, especially when there is an interaction between the multiple impellers. The extent of interaction depends on relative distances between the impellers and clearan...
full textMy Resources
Journal title
volume 9 issue 3
pages 14- 21
publication date 2012-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023