Comparison of plasticity and stiffness of steel shear walls with composite steel plate shear wall

Authors

  • Leila Shahryari PhD of Civil Engineering-Structure, Faculty member. A. Department of Civil Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran.
  • Mahdi Esfandiari MS of Civil Engineering-Structure. A. Department of Civil Engineering, Shiraz Branch, Islamic Azad University Shiraz, Iran.
Abstract:

The steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. Composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasing the strength, ductility and energy absorption, it is very economical and affordable and it is used in constructing high buildings, retrofitting buildings and tanks. In this paper we have tried to examine the seismic behavior of steel and composite shear walls. For this purpose several models of steel shear and composite walls from one to five stories were constructed and analyzed by Abaqus software. The result show that composite steel plate shear walls has more ability to absorb energy, spread produced stress to different parts of the steel plate and ductile than steel shear walls. The curve hysteresis loop of composite steel palate shear walls is more stable and sustainable than steel shear wall. With increasing the number of stories, the initial strength and stiffness is decreased due to increase in lateral shift but the amount of absorbing energy and ductility is increased. The force tolerance in composite steel plate shear wall models is increased in comparison with steel shear walls

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

comparison of plasticity and stiffness of steel shear walls with composite steel plate shear wall

the steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...

full text

Seismic Performance of Steel Plate-Reinforced Concrete Composite Shear Wall

In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...

full text

non-linear study of various slit shear walls in steel structures

seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...

15 صفحه اول

experimental study of steel plate shear walls with composite steel infill platesunder cyclic loading

in this paper, nonlinear behavior of composite steel plate shear wall systems, in which steel infill plate is strengthened by fiber reinforced polymer (frp) layers, are experimentally investigated. tests are designed to evaluate the effect of glass-frp layers, layers number of gfrp and orientation of gfrp layers on the stiffness, shear strength, cumulative dissipated energy and other seismic pa...

full text

Non-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls

In this study, non-linear behavior of diagonally stiffened steel plate shear walls as a seismic resisting system has been investigated, and theoretical formulas for estimating shear strength capacity of the system have been proposed. Several validated analytical finite element models of steel shear walls with various stiffener dimensions are generated to verify and compare the analytical and th...

full text

TOPOLOGY OPTIMIZATION OF PERFORATED STEEL PLATE SHEAR WALLS WITH THICK PLATE IN SIMPLE FRAMES

In this paper, topology optimization (TO) is applied to determine the form, size and location of holes for the special form of perforated steel plate shear wall (PSPSW). The proposed model is based on the recently presented particular form of PSPSW that is called the ring-shaped steel plate shear wall. The strain energy is selected as the objective function in the optimization. Simple Isotropic...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue 3

pages  21- 26

publication date 2015-09-30

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023