Combined mixed convection and radiation simulation of inclined lid driven cavity

Authors

  • Abdolreza Gandjalikhan Nassab Department of Mechanical Engineering, School of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
  • Maryam Moein Addini Department of Mechanical Engineering, School of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
Abstract:

This paper presents a numerical investigation of the laminar mixed convection flow of a radiating gas in an inclined lid-driven cavity. The fluid is treated as a gray, absorbing, emitting, and scattering medium. The governing differential equations including continuity, momentum and energy are solved numerically by the computational fluid dynamics techniques (CFD) to obtain the velocity and temperature fields. The discretized forms of these equations are obtained by the finite volume method and solved by using the SIMPLE algorithm. Since the gas is considered as a radiating medium, besides convection and conduction heat transfer, radiation also takes place in the gas flow. For computing the radiative term in the gas energy equation, the radiative transfer equation (RTE) is solved numerically by the discrete ordinate method (DOM). The streamline and isotherm plots and the distributions of convective, radiative and total Nusselt numbers along the bottom wall of the cavity are presented. In this work, an attempt is made to investigate the hydrodynamic and thermal behavior of the mixed convection flow of a radiating gas at different values of the cavity inclination angle. The numerical results reveal that the variation of inclination angle causes a sweep behavior in the flow pattern inside the cavity. Besides, it is found that the value of radiative Nusselt number along the heated wall has a decreasing trend when the medium optical thickness is increases. Comparisons between the present numerical results with those obtained by other investigators in the cases of conduction-radiation and pure convection systems show good consistencies.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Mixed Convection in an Inclined Lid-driven Square Cavity with Sinusoidal Heating on Top Lid

Numerical study on the effect of inclination angle with sinusoidal heating on top moving lid in two-dimensional square cavity is investigated. The top lid is heated sinusoidally while the bottom wall is maintained at cold temperature. The vertical walls are insulated and the cavity is filled with water. Finite volume method and SIMPLE algorithm are employed to solve the dimensionless governing ...

full text

Evaluation of Mixed Convection in Inclined Square Lid- Driven Cavity Filled with Al2o3/water Nano-fluid

To study the mixed convection flows in a square double lid-driven cavity with various inclination angles, a numerical method based on the finite volume method is used. In this investigation Al2O3/water nanofluid with particle diameter of 47 nanometers in different solid volume fractions have been utilized. Flow is obtained by the top and bottom walls, which slide in opposite direction at consta...

full text

Numerical Simulation of Mixed Convection Flows in a Square Double Lid-Driven Cavity Partially Heated Using Nanofluid

A numerical study has been done through an Al2O3–water in a double lid-driven  square  cavity with various  inclination  angles  and discrete heat sources. The top and right moving walls are at low temperature. Half of  the  left and bottom walls are  insulated and  the  temperatures of the other half are kept at high. A large number of simulations for a wide  range  of Richardson  number ...

full text

Numerical Study of Mixed Convection Coupled to Radiation in a Square Cavity with a Lid-Driven

In this study, we investigated numerically heat transfer by mixed convection coupled to radiation in a square cavity; the upper horizontal wall is movable. The purpose of this study is to see the influence of the emissivity ε and the varying of the Richardson number Ri on the variation of average Nusselt number Nu. The vertical walls of the cavity are differentially heated, the left wall is mai...

full text

Numerical Simulation of Mixed Convection Flows in Lid- Driven Square Cavity

Mixed convection heat transfer in two-dimensional liddriven rectangular cavity filled with air (Pr =0.71) is studied numerically. A hybrid scheme with multiple relaxation time Lattice Boltzmann Method (MRT-LBM) is used to obtain the velocity field while the temperature field is deduced from energy balance equation by using the Finite Difference Method (FDM). The main objective of this work is t...

full text

Numerical Investigation of Magnetic Field Effects on Mixed Convection Flow in a Nanofluid-filled Lid-driven Cavity

In this work, the stencil adaptive method is applied to investigate the effects of a magnetic field on mixed convection of Al2O3-water nanofluid in a square lid-driven cavity. The incompressible Navier-Stokes equations are solved by an adaptive mesh method which has superior numerical advantages compared to the traditional method on the uniform fine grid. The main objective of this study is to ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 6  issue 3

pages  261- 277

publication date 2018-09-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023