CATALYTIC REFORMING OF n-HEPTANE ON PLATINUMNIOBIUM SUPPORTED ON GAMMA-ALUMINA
Authors
Abstract:
The series of mono-metallic and bi-metallic catalysts have been prepared by impregnatingwith solutions containing compound of H2PtC15,NbC15 and lml HC1 (0.1 mol). The activityand selectivity of the catalysts have been determined under conditions at 450-500°C, 15-30atm. Molar ratio H2/C7H16=5 and VVH=1.5/h for converting n-heptane. Under theseexperimental conditions it has been established that the conversion of n-heptane intobranched aliphatic isomers is catalyzed by a bifunctional mechanism. The results show thatwhen Nb is present, the catalysts are much more stable and have much higher selectivities forisomerization reaction. At a given conversion the bimetallic catalysts produce much lowerconcentrations of cracked products. It is shown that Nb modifies the acidity of the support,resulting to higher selectivity for isomerization and lower selectivity for cracking and alsomodifies the properties of the Pt.
similar resources
catalytic reforming of n-heptane on platinumniobium supported on gamma-alumina
the series of mono-metallic and bi-metallic catalysts have been prepared by impregnatingwith solutions containing compound of h2ptc15,nbc15 and lml hc1 (0.1 mol). the activityand selectivity of the catalysts have been determined under conditions at 450-500°c, 15-30atm. molar ratio h2/c7h16=5 and vvh=1.5/h for converting n-heptane. under theseexperimental conditions it has been established that ...
full textCATALYTIC REFORMING OF n-HEPTANE ON PLATINUM-TUNGSTEN SUPPORTED ON GAMMA-ALUMINA
The mono-metallic and bi-metallic catalysts have been prepared by impregnating with solutions containing a compound of H2PtCl6,WO3 and 1ml HCl (0.1 mol). It should be noted that the catalysts’ activity and selectivity have been determined under these conditions : 450-5000C ,and 15-25atm by H2. For converting n-heptane , the molar ratio H2/C7H16 is 5 , and LHSV is 1.5ml/h. It has been proved tha...
full textCatalytic Reforming of n-Heptane on Platimum - Rhenium Supported on Gamma-Alumina
Catalyitic reforming is one of the refinery processes in catalyst conversion that results to anincreases in octane number of naphtan which leads to production of gasoline with higher octanenumber. Hydrocarbons with high octan number that are produced in reforming process are as;aromatics, paraffins, isomers and etc.Not only Aromatics are used as fuel for motors but they are also useful in petro...
full textcatalytic reforming of n-heptane on platinum-tungsten supported on gamma-alumina
the mono-metallic and bi-metallic catalysts have been prepared by impregnating with solutions containing a compound of h2ptcl6,wo3 and 1ml hcl (0.1 mol). it should be noted that the catalysts’ activity and selectivity have been determined under these conditions : 450-5000c ,and 15-25atm by h2. for converting n-heptane , the molar ratio h2/c7h16 is 5 , and lhsv is 1.5ml/h. it has been proved tha...
full textDetermination of Activity and Selectivity of n-Heptane by Reforming Catalytic Pt-V Supported on gamma-Alumina
Bimetallic Pt-V supported by Gamma-alumina is used to observe the changes of nheptanewhen passed over this catalyst. The Pt concentration was kept constant at0.1wt% while the concentration of the vanadium was 0.5wt%. The activity andselectivity of catalyst have been determined under conditions at 450-500 degreescentigrade and 15-30 attn. The experimental results show that the addition of second...
full textdetermination of activity and selectivity of n-heptane by reforming catalytic pt-v supported on gamma-alumina
bimetallic pt-v supported by gamma-alumina is used to observe the changes of nheptanewhen passed over this catalyst. the pt concentration was kept constant at0.1wt% while the concentration of the vanadium was 0.5wt%. the activity andselectivity of catalyst have been determined under conditions at 450-500 degreescentigrade and 15-30 attn. the experimental results show that the addition of second...
full textMy Resources
Journal title
volume 3 issue 1
pages 7- 16
publication date 2006-04-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023