Aqueous Quinoline Treatment with Iron/ Copper Activated UV/ Persulfate Process in a Falling Film Photo-Reactor
Authors: not saved
Abstract:
This article doesn't have abstract
similar resources
Removal of p-chlorophenol from aqueous solution using ultraviolet/zerovalent-iron (UV/ZVI)/persulfate process
In this study, degradation of p-chlorophenol (p-CP) was evaluated using persulfate (PS) activated zerovalent iron (ZVI) based ultraviolet (UV) in a bench scale photoreactor. The effect of operational parameters such as solution pH (3, 7, and 11), reaction time (0-60 minutes), ZVI dosage (0.15, 1.25, 0.5, 1, and 1.5 mM), PS concentration (0.5, 1.5, 2, 2.5, 3, and 4 mM), and initial p-CP concentr...
full textremoval of p-chlorophenol from aqueous solution using ultraviolet/zerovalent-iron (uv/zvi)/persulfate process
in this study, degradation of p-chlorophenol (p-cp) was evaluated using persulfate (ps) activated zerovalent iron (zvi) based ultraviolet (uv) in a bench scale photoreactor. the effect of operational parameters such as solution ph (3, 7, and 11), reaction time (0-60 minutes), zvi dosage (0.15, 1.25, 0.5, 1, and 1.5 mm), ps concentration (0.5, 1.5, 2, 2.5, 3, and 4 mm), and initial p-cp concentr...
full textTreatment of Aqueous Film-Forming Foam by Heat-Activated Persulfate Under Conditions Representative of In Situ Chemical Oxidation
Poly- and perfluoroalkyl substances (PFASs) have been detected in an increasing number of water supplies. In many instances, the contamination is associated with the use of PFAS-containing aqueous film-forming foams (AFFF) in firefighting activities. To investigate the potential for remediating AFFF contamination in groundwater with heat-activated persulfate, PFAS oxidation and the generation o...
full textOptimization of sonochemical degradation of tetracycline in aqueous solution using sono-activated persulfate process
BACKGROUND In this study, a central composite design (CCD) was used for modeling and optimizing the operation parameters such as pH, initial tetracycline and persulfate concentration and reaction time on the tetracycline degradation using sono-activated persulfate process. The effect of temperature, degradation kinetics and mineralization, were also investigated. RESULTS The results from CCD ...
full textArsenic Oxidation Using UV-Activated Persulfate in Aqueous Solutions: Optimization Using Response Surface Methodology Based on Box-Bencken Design
Introduction: The use of arsenic contaminated water can cause a variety of adverse health effects in humans. Therefore, it is essential to seek out a method to remove arsenic more efficiently. This study examined the amount of arsenic oxidation by response surface methodology (RSM) based on Box-Bencken design. Materials and Methods: In this study, oxidizing arsenite to arsenate was performed b...
full textEffects of adsorbents and copper(II) on activated sludge microorganisms and sequencing batch reactor treatment process.
Wastewater treatment systems employing simultaneous adsorption and biodegradation processes have proven to be effective in treating toxic pollutants present in industrial wastewater. The objective of this study is to evaluate the effect of Cu(II) and the efficacy of the powdered activated carbon (PAC) and activated rice husk (ARH) in reducing the toxic effect of Cu(II) on the activated sludge m...
full textMy Resources
Journal title
volume 11 issue 4
pages 50- 63
publication date 2014-10-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023