Application of Pulse Method to Incremental Slitting Measurement of Residual Stresses in Laminated Composites
Authors
Abstract:
In this research, the incremental slitting method was employed to determine throughthickness residual stress profile of a carbon/epoxy laminate. The method involves measuring strains at the back surface of the stressed specimen, while a narrow slit is cut by a CNC milling machine progressively from the top surface of the specimen. "Pulse Method" was selected as the computational approach for the determination of residual stresses from measured strains. Results show that thermal residual stresses resulting from curing process of laminated composites have high values and may play a significant role in the failure of these components.
similar resources
Residual Stresses Measurement of a Quenched Cylinder using Slitting Method
Residual Stress measurement has gained interests among researchers for many years due to its great influence on the structural integrity. Slitting method is one of the destructive techniques that relies on the introduction of an increasing cut to a part containing residual stresses. Similar to all other mechanical strain relief techniques, slitting also suffers from its shortcomings during the ...
full textresidual stresses measurement of a quenched cylinder using slitting method
residual stress measurement has gained interests among researchers for many years due to its great influence on the structural integrity. slitting method is one of the destructive techniques that relies on the introduction of an increasing cut to a part containing residual stresses. similar to all other mechanical strain relief techniques, slitting also suffers from its shortcomings during the ...
full textInvestigation of Important Parameters in Residual Stress Determination in Isotropic Plates and Laminated Composites by Slitting Method
In the slitting method, a small width slit is created incrementally through the thickness of the stressed specimen and the released strains in each increment are recorded by a strain gauge. Compliance coefficients relate the measured strains to the residual stresses. This paper investigates the important parameters influencing the calculation of compliance coefficients for isotropic plates and ...
full textdevelopment of an integral method for determination of non-uniform residual stresses in laminated composites
a new method for determination of residual stresses in the bottom layers of laminated composites is developed. in this method the residual stresses are determined by performing a consecutive drilling of laminated composites in the center of the rosette and recording the strains after drilling each layer. the depth of the hole in each step is equal to the thickness of each layer and the maximum ...
full textA Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube
In this research, a novel method to decrease micro-residual stresses of fibrous composites by adding carbon nanotubes (CNTs) is proposed in detail. The negative coefficient of thermal expansion and the high young’s modulus of CNTs can be utilized to counterbalance the process induced residual stresses in composites. To this end, first, the effects of adding CNTs to the matrix of fibrous composi...
full textResidual Stresses Measurement in Hollow Samples Using Contour Method
Residual stresses are created usually undesirably during manufacturing processes, including casting, welding, metal forming, etc. Residual stresses alone or in combination with other factors can cause the destruction and fracture of components or significant decline in their service life. Therefore, it is crucial to measure the residual stresses. Contour method is a destructive testing method c...
full textMy Resources
Journal title
volume 4 issue 1
pages 9- 15
publication date 2012-06-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023