Application of carbon ceramic modified electrode with prussian blue for electrocatalytic oxidation of nitrite ion
Authors
Abstract:
A novel chemically modified electrode containing Prussian blue complex was achieved on the surface of glass carbon electrode by sol-gel technique. The electrochemical behavior of modified electrode was characterized by cyclic voltammetry in detail. The film electrode obtained was very stable and exhibited electrocatalytic response for oxidation of nitrite. Results showed at bare GC electrode, a small oxidation peak current was observed at about 740 mV and a well-formed sharp catalytic oxidation peak at about 600 mV was observed at Prussian blue complex modified electrode. The transfer coefficient (α) for electrocatalytic oxidation of nitrite and the diffusion coefficient of this substance under the experimental conditions were also investigated.
similar resources
application of carbon ceramic modified electrode with prussian blue for electrocatalytic oxidation of nitrite ion
a novel chemically modified electrode containing prussian blue complex was achieved on the surface of glass carbon electrode by sol-gel technique. the electrochemical behavior of modified electrode was characterized by cyclic voltammetry in detail. the film electrode obtained was very stable and exhibited electrocatalytic response for oxidation of nitrite. results showed at bare gc electrode, a...
full textElectrocatalytic oxidation of sulfite Ion at the surface carbon ceramic modified electrode with prussian blue
The redox properties of sulfite ion has been examind using cyclic voltammetry in acetonitrile solvent at the surface of gold, pelatin and glassy carbon electrodes. It has bben found tha, sulfite ion exhibits two electron oxidation peak with EC’ mechanism. A novel chemically modified electrode containing Prussian blue complex and multi wall carbon nanotubes (MWCNs) was achieved on the surface of...
full textApplication of copper oxide nanoparticles modified glassy carbon electrode for electrocatalytic oxidation of methanol
Copper nanoparticles were fabricated by electro-reduction of CuSO4solution in the presence of cetyltrimethylammonium bromide (CTAB) cationic surfactant as an additive through potentiostatic method. The prepared copper nanoparticles were characterized by scanning electron microscopy (SEM) and electrochemical methods. The SEM images reveal that the nanoparticles with diameters at about 70 n...
full textElectrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell
In this study, a sodalite nanozeolite was synthesized and characterized by X-ray diffraction (XRD) and scanning electronic microscopy (SEM). Following the morphology evolution of the sodalite nanozeolite in the SEM images illustrates the formation of the spherical particle with a size between 60 and 80 nm. Then, carbon paste electrode (CPE) was modified by sodalite nanozeolite and Ni2+ ions. Th...
full textapplication of copper oxide nanoparticles modified glassy carbon electrode for electrocatalytic oxidation of methanol
copper nanoparticles were fabricated by electro-reduction of cuso4solution in the presence of cetyltrimethylammonium bromide (ctab) cationic surfactant as an additive through potentiostatic method. the prepared copper nanoparticles were characterized by scanning electron microscopy (sem) and electrochemical methods. the sem images reveal that the nanoparticles with diameters at about 70 n...
full textapplication and construction of carbon paste modified electrodes developed for determination of metal ions in some real samples
ساخت الکترودهاِی اصلاح شده ِیکِی از چالشهاِی همِیشگِی در دانش شیمِی بوِیژه شیمِی تجزیه مِی باشد ،که با در نظر گرفتن سادگِی ساخت، کاربردی بودن و ارزان بودن روش مِی توان به باارزش بودن چنِین سنسورهاِی پِی برد.آنچه که در ادامه آورده شده به ساخت و کاربرد الکترودهاِی اصلاح شده با استفاده از نانو ذرات در اندازه گِیرِی ولتامترِی آهن وکادمِیم اشاره دارد. کار اول اختصاص دارد به ساخت الکترود خمِیر کربن اصلاح شده با لِیگاند داِ...
15 صفحه اولMy Resources
Journal title
volume 4 issue Issue 3, pp. 236-358
pages 256- 264
publication date 2016-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023