Antibacterial response of Cd-TiO2/PEG/folic acid nanocomposite under ultraviolet, visible light, or ultrasonic irradiation
Authors
Abstract:
Synthesis and characterization of Cd-TiO2/PEG/FA nanocomposite as a biomaterial is the main aim of this research. Cd-doped TiO2 nanoparticles (NPs) were synthesized by solvothermal assisted sol-gel method. Then, polyethylene glycol (PEG) was added to the as-synthesized NPs in order to modify their surface and to prevent agglomeration. In the next step, folic acid (FA) was conjugated to Cd-TiO2/PEG nanocomposite. Optimization of FA concentration and influence of ultraviolet (UV) radiation, visible light, or ultrasonic irradiation on antibacterial activity of the synthesized nanocomposite were assessed. Results showed that the influence of FA on the antibacterial performance of the as-synthesized compounds is positive and dose-dependent. FA was used as bait for bacteria and led them to accumulate around the Cd-TiO2 NPs. The bactericidal response under UV or visible light irradiation was maximized at 0.6 weight ratio of FA to Cd-TiO2, whereas, this parameter under ultrasonic irradiation was improved and then became approximately constant.
similar resources
The Study of Photocatalytic Degradation Mechanism under Visible Light Irradiation on BiOBr/Ag Nanocomposite
Due to the pollution of dyeing and textile industry wastewaters in different colors and the need to remove these pollutants from the wastewaters, it is necessary to study and develop effective and efficient technology solutions required. To remove dye from aqueous solutions, photodegradation is employed as an effectively simple way. Thus, the BiOBr photocatalyst was chemically made by synthesis...
full textPhotocatalytic Removal of Acid Blue 113 Dye from Aqueous Solutions Using Zinc Oxide-Kaolin Nanocomposite under Visible Light Irradiation
Background and purpose: Textile industries produce huge amounts of colored wastewater. Synthetic dyes cause serious problems to human health and aquatic organisms due to their toxic and carcinogenic properties. In this study, Acid Blue 113 (AB113), which is stable and persistent against conventional treatment methods was selected as the target contaminant. Materials and methods: The synthesis ...
full textPhotocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation
Photodegradation of methyl orange was investigated using synthesized TiO2:Mg2+/zeolite as the photocatalyst. The photocatalyst was characterized by X-ray, XRF, FT-IR, and SEM. The photocatalytic activities of TiO2:Mg2+/zeolite samples were evaluated in the degradation of methyl orange under visible light irradiation. The appropriate content of Mg in the composite was obtained as 4.711 wt% with ...
full textSynthesis of nanocomposite based on Semnan natural zeolite for photocatalytic degradation of tetracycline under visible light
This study investigated the photocatalytic behaviors for the nanocomposite of TiO2 P25 and Semnan natural zeolite in the decomposition of tetracycline under visible light in an aqueous solution. The structural features of the composite were investigated by a series of complementary techniques that included X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), scanning elec...
full textPhotocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation
In this paper, 2wt.% Fe doped TiO2 nanopowder was prepared by a combination of sol-gel and mechanical alloying methods. The mechanical alloying of Fe powder with Ti(OH)4 gel produced from the sol-gel method was used to produce Fe doped TiO2 nanopowder. The synthesized samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and diffuse reflectan...
full textPreparation and Characterization of ZrO2/ZnO Nanocomposite under Ultrasonic Irradiation via Sol-gel Route
Nanocomposite of ZrO2/ZnO was prepared under ultrasonic irradiation by sol gel process from directly mixing Zirconium and Zinc gels, and the mixture was placed under ultrasonic irradiation for 2 hours then aging time the filtrated composite gel was calcinated at 500°C for 3h in furnace. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4 and zinc acetate dihydrated was...
full textMy Resources
Journal title
volume 9 issue 4
pages 768- 775
publication date 2019-10-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023