Analytical Solutions for the Flexural Behavior of Metal Beams Strengthened with Prestressed Unbonded CFRP Plates

Authors

  • Elyas Ghafoori Empa, Swiss Federal Laboratories for Materials Science and Technology, Structural Engineering Research Laboratory, Dübendorf, Switzerland
  • Farrokh Kianmofrad Arizona State University, School of Sustainable Engineering and the Built Environment, Tempe AZ 85287, USA
  • Masoud Motavalli Empa, Swiss Federal Laboratories for Materials Science and Technology, Structural Engineering Research Laboratory, Dübendorf, Switzerland
Abstract:

Trapezoidal prestressed unbonded retrofit (TPUR) systems have been recently developed and tested. The authors have already developed a comprehensive and accurate analytical solution for the TPUR system that takes many system parameters into account. The main aim of this paper is to develop a simplified analytical solution for predicting the behavior of metal beams that have been strengthened with the TPUR system. The developed analysis method can be useful to engineers because of its simplicity. An energy approach based on Castigliano’s theorems is used to study the flexural behavior of a steel beam retrofitted with the TPUR system. A parametric study was performed and the comparative results showed that the results using Castigliano’s first theorem are in agreement with the results using the flexibility approach.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Behavior of Prestressed Concrete Beams with CFRP Strands

................................................................................................................................. i Dedication........................................................................................................................... iii Acknowledgements............................................................................................................. i...

full text

Flexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets

The objective of this study is to investigate the effectiveness of externally bonded CFRP sheets to increase the flexural strength of reinforced high strength concrete (HSC) beams. Four-point bending flexural tests to complete failure on six concrete beams, strengthened with different layouts of CFRP sheets were conducted. Three-dimensional nonlinear finite element (FE) models were adopted by A...

full text

experimental and analytical investigation of behavior of rc beams strengthened by prestressed cfrp straps using nsm method

the current study is focused on strengthening of reinforced concrete (rc) beams using cfrp straps installed in pre-cut grooves. the method which is referred as near surface mounted (nsm) benefits considerable advantages in comparison with the conventional externally bonded reinforcement (ebr) method and provides better normal and shear stress transfer between the frp and concrete substrate. the...

full text

Ultimate Unbonded Tendon Stress in CFRP Strengthened Post-Tensioned Indeterminate I-Beams Cast with HSCs

Based on the bending experiment for two-span continuous post-tension beams with unbounded tendons and externally applied CFRP sheets, the analysis of the stress increment of unbonded tendons is monitored in the loading process. Since self-compacting concrete (SCC) is a suitable innovation,, understanding the implementation of this type of concrete on the ultimate unbonded tendon stress is criti...

full text

Fatigue Assessment Model of Corroded RC Beams Strengthened with Prestressed CFRP Sheets

This paper presents a fatigue assessment model that was developed for corroded reinforced concrete (RC) beams strengthened using prestressed carbon fiber-reinforced polymer (CFRP) sheets. The proposed model considers the fatigue properties of the constituent materials as well as the section equilibrium. The model provides a rational approach that can be used to explicitly assess the failure mod...

full text

Finite Element Modelling of Steel-concrete Composite Beams Strengthened with Prestressed Cfrp Plate

This paper presents results from Finite Element Modelling (FEM) of steel-concrete composite beams strengthened with prestressed Carbon Fibre Reinforced Polymer (CFRP) plate. For the purpose of this study, three beams were strengthened using prestressed CFRP plate with three different levels of induced prestressing force. The models were developed using ANSYS FE package. The results of an experi...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 51  issue 1

pages  101- 118

publication date 2018-06-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023