Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints

Authors

  • Bahman Ghorbani Msc. of Mechanical Engineering, Department of Mechanical Engineering, Khajeh Nasir Toosi University of Technology
  • Mehdi Zohour Associate Professor, Department of Mechanical Engineering, Khajeh Nasir Toosi University of Technology,
Abstract:

Electromagnetic forming is a high energy rate forming process. In this process, an electromagnetic Lorentz body force is used for deformation of products. In this article, Electromagnetic forming process was simulated for assembly of parts as an innovative method. In this research work, the effect of important parameters of process such as discharge energy, radius and width of rectangular groove on the strength of assembled products were studied by using finite element technique and design of experiment. After introducing the governing equations, the output of these equations were applied in simulation as a pressure on work-piece. In this simulation, an axisymmetric model was used in analysis and Johnson-Cook theory was applied due to high strain rate to show the plastic behavior of materials. Finally, the numerical results were compared with the experimental results reported by other researchers and found a good correlation between them. As a result, the bead depth increases with the increase of the discharge energy and more filling groove, increasing strength of joint. In addition, Strength of joint increases, due to create partial shearing of the tube at the groove edge and interference stresses at the tube and mandrel interface.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Aluminum Tube Joints

Electromagnetic forming is a high energy rate forming process in which an electromagnetic Lorentz body force is used for deformation of products.  In this article, electromagnetic forming process was simulated for the assembly of parts as an innovative method.  The effect of important process parameters such as discharge energy, radius and width of rectangular groove on the strength of the asse...

full text

Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Aluminum Tube Joints

Electromagnetic forming is a high energy rate forming process in which an electromagnetic Lorentz body force is used for deformation of products.  In this article, electromagnetic forming process was simulated for the assembly of parts as an innovative method.  The effect of important process parameters such as discharge energy, radius and width of rectangular groove on the strength of the asse...

full text

analytical and numerical investigation of significant parameters on strength of electromagnetically assembled products joints

electromagnetic forming is a high energy rate forming process. in this process, an electromagnetic lorentz body force is used for deformation of products. in this article, electromagnetic forming process was simulated for assembly of parts as an innovative method. in this research work, the effect of important parameters of process such as discharge energy, radius and width of rectangular groov...

full text

analytical and numerical investigation of significant parameters on strength of electromagnetically assembled aluminum tube joints

electromagnetic forming is a high energy rate forming process in which an electromagnetic lorentz body force is used for deformation of products.  in this article, electromagnetic forming process was simulated for the assembly of parts as an innovative method.  the effect of important process parameters such as discharge energy, radius and width of rectangular groove on the strength of the asse...

full text

investigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem

در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 2  issue 4

pages  29- 38

publication date 2013-11-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023