Analysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology

Authors

  • Ali Doniavi Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran
  • Gohar Ranjbari Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran
  • Mehrdad Shahbaz Department of Materials Science and Engineering, Faculty of Engineering, Urmia University, Urmia, Iran
Abstract:

The effect of geometrical parameters involved in vortex extrusion (VE) die design, on AA1050 aluminium alloy processed by VE were investigated using finite element analysis (FEA) and response surface methodology (RSM). For this, VE die length (L), reduction in area (RA), twist angle , and position of control points in Beziers' formulation (C1) were considered as input parameters and strain inhomogeneity was considered as a response. Both standard deviation (S.D) and inhomogeneity index (Ci) were used to quantify the strain inhomogeneity from FEA results. Analysis of variance (ANOVA) was used to determine the significant parameters and to mathematically model the strain inhomogeneity. It was concluded that standard deviation (S.D) is not a good choice for examining the strain inhomogeneity distribution in VE technique. ANOVA results showed that , RA, and interaction between  and RA are the most significant parameters affecting the strain inhomogeneity.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Minimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method

In most of the sheet forming processes, production of the parts with minimum thickness variation and low required force is important. In this research, minimization of the sheet thinning and forming force in the hydraulic deep drawing process has been studied. Firstly, the process is simulated using the finite element method (FEM) and simulation model is verified using the experimental results....

full text

Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method

In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...

full text

preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis

کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.

The Effects of Newmark Method Parameters on Errors in Dynamic Extended Finite Element Method Using Response Surface Method

The Newmark method is an effective method for numerical time integration in dynamic problems. The results of Newmark method are function of its parameters (β, γ and ∆t). In this paper, a stationary mode I dynamic crack problem is coded in extended finite element method )XFEM( framework in Matlab software and results are verified with analytical solution. This paper focuses on effects of main pa...

full text

analysis of three dimensional of forward extrusion using slab method and finite element

slab method of analysis has been used for solving metal forming problems for a long time. however it has been restricted to plane strain and axisymmetric problems due to limitations in its formulations. in this paper a new formulation has been proposed so that it could be applied to three dimensional problems in metal forming. a parametric slab has been considered in this analysis and the force...

full text

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 7  issue 2

pages  26- 31

publication date 2020-10-30

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023