An Ultra High CMRR Low Voltage Low Power Fully Differential Current Operational Amplifier (COA)
Authors
Abstract:
this paper presents a novel fully differential (FD) ultra high common mode rejection ratio (CMRR) current operational amplifier (COA) with very low input impedance. Its FD structure that attenuates common mode signals over all stages grants ultra high CMRR and power supply rejection ratio (PSRR) that makes it suitable for mixed mode and accurate applications. Its performance is verified by HSPICE simulations using TSMC 0.18µm CMOS technology and ±0.75V supply voltage that indicate such outstanding results of 81.1dB gain,298MHz gain-bandwidth product, 64º phase margin, 28.2m&Omega input impedance, 159dB CMRR and PSRR+/PSRR- of 174dB/163dB all at low power consumption of 0.302mW.To study the robustness of the COA against technology and get such results close to measurement, Monte Carlo analysis is applied on both pre- layout and post layout simulations of the design. The results are as 73.29dB and 2.07MHz, 1.92&Omega, and150.35dB for Ai magnitude and bandwidth, Ri, and CMRR, respectively, in pre-layout case while change to 66.58dB and 1.44 MHz, 11.07 &Omega, and 147.10dB, for the same arrange, in post layout case. These measurement-like results thus, prove excellent practical performance of the proposed COA.
similar resources
A Low Power Low Voltage Rail to Rail Constant gm Differential Amplifier with 150 dB CMRR and Enhanced Frequency Performance
This paper proposes a low voltage (±0.55V supply voltage) low power (44.65µW) high common mode rejection ratio (CMRR) differential amplifier (d.a.) with rail to rail input common mode range (ICMR), constant transconductance (gm) and enhanced frequency performance. Its high performance is obtained using a simple negative averaging method so that it cancels out the common mode input signals at th...
full textLow Voltage Low Power Dynamic Differential Difference Operational Amplifier
The idea is using advanced analog design methodology for LVLP to push the basic analog circuit design toward LVLP applications. It is necessary to point out that this report is just an outline of what the final project will accomplish. Those parameters mentioned above are subjected to be changed during the design process to achieve higher performance or more realistic. Parameter Name Value Para...
full textUltra low-voltage low-power current conveyor transconductance amplifier
Fabian Khateb*, Montree Kumngern, Salma Bay Abo Dabbous, Tomasz Kulej & Abhirup Lahiri Department of Microelectronics, Brno University of Technology, Technická 10, Brno, Czech Republic Czech Technical University in Prague, Faculty of Biomedical Engineering, nám. Sítná 3105, Kladno, Czech Republic Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand ...
full textA 0.6v Ultra Low Voltage Operational Amplifier
A technique for low-voltage CMOS analog circuit design is presented in this paper. In this technique, voltage sources are added in series with the gates of the MOS transistors to lower the effective threshold voltages of the transistors. With the lowered effective threshold voltage, it is possible to build a host of analog circuit that operates with a decreased supply voltage. A 0.6V ultra-low ...
full textA Novel Low Voltage, Low Power and High Gain Operational Amplifier Using Negative Resistance and Self Cascode Transistors
In this work a low power, low voltage and high gain operational amplifier is proposed. For this purpose a negative resistance structure is used in parallel with output to improve the achievable gain. Because of using self cascode transistors in the output, the proposed structure remains approximately constant in a relatively large output voltage swing causing an invariable gain. To evaluate the...
full textLow voltage Low Power Fully Differential Buffer
In this letter a useful CMOS fully-differential buffer topology is presented. The proposed solution, performing the common mode feedback (CMFB) operation, shows a rail-to-rail characteristic, so it is particularly suitable for low-voltage (± 0.75V) low-power (<400 μW) applications. The simulated results have shown excellent general performance, evaluated in terms of suitable figures of merit (F...
full textMy Resources
Journal title
volume 11 issue 4
pages 294- 300
publication date 2015-12
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023