An experimental investigation of heat transfer of Fe2O3/Water nanofluid in a double pipe heat exchanger
Authors
Abstract:
One way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. In the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. In this work, the performance of water / iron oxide nanofluid in a double pipe heat exchanger with perforated twisted tapes is investigated under turbulent flow regime. Reynolds number considered is in the range between 2500 to 20500. Iron oxide nanoparticles with diameter of 15 nm are used as nanofluid with the concentration range from 0.12 to 0.2% by volume. The results showed that the addition of nanoparticles increases the heat transfer and the Nusselt number. Also, reducing the twist ratio (H/D=2.5) of perforated twisted tape and using the nanofluid with concentration of 0.2%v/v increase this value by 130%.
similar resources
an experimental investigation of heat transfer of fe2o3/water nanofluid in a double pipe heat exchanger
one way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. in the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. in this work, the performance of water / iron oxide nanofluid in a double...
full textHeat Transfer of Nanofluid in a Double Pipe Heat Exchanger
This paper investigates the enhancement of heat transfer coefficient and Nusselt number of a nanofluid containing nanoparticles (γ-AL2O3) with a particle size of 20 nm and volume fraction of 0.1%-0.3% (V/V). Effects of temperature and concentration of nanoparticles on Nusselt number changes and heat transfer coefficient in a double pipe heat exchanger with counter turbulent flow are investigate...
full textFactor Effect Estimation in the Convective Heat Transfer Coefficient Enhancement of Al2O3/EG Nanofluid in a Double-pipe Heat Exchanger
The forced convective heat transfer (CHT) coefficient of a particular nanofluid, Al2O3 nanoparticles-ethylene glycol (EG) mixture, was investigated experimentally in a double-pipe heat exchanger. The nanofluid Nusselt number for different nanoparticles’ concentrations as well as various operating temperatures was measured to be increased up to 23.7% using 1.0% wt of nanoparticles. The significa...
full textThe Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations
The single-phase flow and thermal performance of a double pipe heat exchanger are examined by experimental methods. The working fluid is water at atmospheric pressure. Temperature measurements at the inlet and outlet of the two streams and also at an intermediate point half way between the inlet and outlet is made, using copper-constantan thermocouple wires. Mass flow rates for each stream are ...
full textLaminar Flow Heat Transfer of a Pseudoplastic Fluid through a Double Pipe Heat Exchanger
An experimental study was carried out to obtain the mean convective heat transfer coefficient of aqueous carboximethyl cellulose (CMC) solutions in double-pipe heat <span style="font-size: 10pt; color:...
full textMy Resources
Journal title
volume 6 issue 5
pages 517- 524
publication date 2015-12-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023