An Experimental Investigation of Diesel Engines Fuel Injection Pressure Effect on Power Performance and Fuel Consumption
Authors
Abstract:
The objective of this paper is to investigate the effect of fuel injection pressure on power performance and fuel consumption of diesel engine. In a diesel engine, fuel injection pressure is an important aspect of the engines’ power performance in order to obtain combustion treatment. The experiments in this paper are performed on a four-cylinder two-stroke direct injection diesel engine. The diesel engine power performance and fuel consumption values are investigated based on load variation, engine speed and fuel injection pressure. The power performance values such as; indicated pressure, indicated horse power, shaft horse power, brake horse power and break mean effective pressure, is investigated both for various engine speed-fixed load and fixed engine speed-various loads. The fuel injection pressure changed from 180 to 220 bar. According to the experiment results, the best pressure injection performance has been obtained at 220 bar, specific fuel consumption has been obtained at 200 bar for fixed load-various speed and at 180 bar for various loads-fixed speed. The results of the experiment are shown as graphs in this paper. The experiment results show, that the increasing injection pressures increases the engine power and fuel consumption.
similar resources
Numerical and experimental investigation of common rail fuel injection system and evaluating influence of fuel pressure on injection characteristics and pressure fluctuations
The combustion processes, engine performance, fuel consumption, exhaust-gas composition, and combustion noise in the diesel engine are closely linked to appropriate mixture of air-fuel in combustion chamber. The fuel-injection parameters such as injection start point, discharge rate curve, injection time and injection pressure are defined by the quality of the mixture formation. The numerical m...
full textNumerical and Experimental Investigation of Motor Pressure Effect on Thermochemical Erosion of Graphite Nozzle in Solid Fuel Engines
Using heat shield, especially in throat area has a significant effect on combustion chamber pressure and thermal efficiency of solid fuel engines. Precise prediction of the regression of throat area for different pressures, will lead to optimal design of the motors, specifically for those of long burnout times. In this work, erosion of graphite nozzles employed in solid propellant motors with a...
full textExperimental investigation on constant-speed diesel engine fuelled with biofuel mixtures under the effect of fuel injection
The petroleum product has seen a drastic demand in the recent past. Biofuels are the only solution to overcome this power crisis. In the view of sustainable energy development, biodiesel and its additives have become the best options for fossil fuel-based engines. In this work, a biodiesel mix was used to show the possible utilization of different biofuels. An experimental investigation was car...
full textReduction of emissions and fuel consumption of diesel engine by using common rail fuel injection and aftertreatment systems
In this experimental study, the fuel system of the OM364 diesel engine manufactured by IDEM company, which operates in the basic mode with inline fuel pump and mechanical governor control, is upgraded to a common rail system with electronic control by the ECU. Also, emmssion of exhaust gases is reduced by SCR and DOC catalysts then performance and emmission parameters of engine are compared i...
full textPrediction of Major Pollutants Emission in Direct-Injection Dual-Fuel Diesel And Natural-Gas Engines
The dual-fuel diesel engine (D.F.D.E) is a conventional diesel engine in which much of the energy released, hence power, comes from the combustion of gaseous fuel such as natural gas. The exhaust emission characteristics of the D.F.D.E needs further refinements, particularly in terms of reduction of Unburnt Hydrocarbons (U7HC) and Carbon Monoxide (CO) emission, because the concentration of thes...
full textEffect of fuel injection discharge curve and injection pressure on upgrading power and combustion parameters in HD diesel engine with CFD simulation
Abstract: In this study, the effect of fuel injection discharge curve and injection pressure simultaneously for upgrading power of heavy duty diesel engine by simulation of combustion process in AVL-Fire software are discussed. Hence, the fuel injection discharge curve was changed from semi-triangular to rectangular which is usual in common rail fuel injection system. Injection pressure with r...
full textMy Resources
Journal title
volume 22 issue 1
pages 91- 97
publication date 2009-04-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023