Adsorption of Copper (II) Ions from Aqueous Solution onto Activated Carbon Prepared from Cane Papyrus

author

  • M. J. Alatabe Environmental Engineering Department, Faculty of Engineering, University of Mustansiriyah, Baghdad, P.O. Box: 14022, Baghdad, Iraq.
Abstract:

The present study evaluates the suitability ofactivated carbon, prepared from Cane Papyrus, a plant that grows naturally and can be found quite easily, which serves as a biological sorbent for removal of  Cu2+ ions from aqueous solutions. Fourier transform infra-red analysis for the activated carbon, prepared fromCane Papyrus confirms the presence of amino (–NH), carbonyl (–C=O), and hydroxyl (–OH) functional groups with Bath mode getting used to investigate the effects of the  following parameters: adsorbent dosage (among the rates of 10, 20, and 30 g/L), pH values, Cu2+ initial concentration, and contact time. Results reveal higher efficiency (98%) of powdered adsorbent for removal of Cu2+ ions, which is found at pH=6 with 30 g/L activated carbon, prepared from Cane Papyrus, for a duration of 2 hours. The Freundlich isotherm model with linearized coefficient of 0.982 describes the adsorption process more suitably than the langmuir model, in which this rate equals to 0.899. Pseudo-second order kinetic equation best describes the kinetics of the reaction. Furthermore, it has been found that 0.5M HCl is a better desorbing agent than either 0.5 M NaOH or de-ionized water. The experimental data, obtained, demonstrate that the activated carbon prepared from Cane Papyrus can be used as a suitable adsorbent for Copper(II) ion removal from aqueous solutions.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Removal of copper (II) from aqueous solutions by adsorption onto granular activated carbon in the presence of competitor ions

In this work, the removal of copper from an aqueous solution by granular activated carbon (GAC) in the presence of competitor ions was studied. A batch adsorption was carried out and different parameters such as pH, contact time, initial copper concentration and competitor ions concentration were changed to determine the optimum conditions for adsorption. The optimum pH required for maximum ads...

full text

Adsorption of copper, lead and cadmium from aqueous solutions by activated carbon prepared from saffron leaves

Background: Industrial development has caused the release of various pollutants including heavy metals into the environment. These toxic compounds are extremely dangerous to living beings and the environment due to their non-biodegradability, severe toxicity, carcinogenicity, the ability to be accumulated in nature and the ability to contaminate groundwater and surface water. The aim of the pre...

full text

Sorption of Cu(II), Zn(II) and Ni(II) from aqueous solution using activated carbon prepared from olive stone waste

The performance of olive stone activated carbon (OSAC) for sorption of Cu2+, Zn2+ and Ni2+ ions was investigated via batch technique. OSAC materials were prepared under different physially activation conditions. Olive stone waste was physically activated with N2 gas and steam gas at 900oC at 3.5h hold time (OSAC-3) was choice as the best one for Cu2+, Zn2+ and Ni2+ removal. Characterization for...

full text

Adsorption of Nickel(II) Ion From Aqueous Solution onto ZnCl2 Activated Carbon Prepared From Delonix Regia Pods (Flame Tree)

Adsorption of Nickel(II) ion onto Activated Carbon prepared from Delonix regia pods activated with Zinc chloride (DRZAC) under various experimental conditions were studied. Batch mode adsorption experiments were conducted. The characteristics of the DRZAC were determined by SEM, XRD, FTIR, BET analysis and pHZPC. The maximum removal efficiency of Ni(II) ion is 85% at pH 6. Under the chosen cond...

full text

Removal of Hexavalent Chromium Ions from Aqueous Solution by Adsorption Using Activated Carbon Prepared from Cucumis Melo Peel Activated carbon

Activated carbon prepared from Cucumis Melo Peel was used as adsorbent for the removal of chromium ion from aqueous solution. Adsorption experiments were performed by varying initial metal ion concentration, temperature, and pH. Freundlich and Langmuir isotherms were used to analyze the equilibrium data obtained at different adsorption conditions. Adsorption results obtained, shows that the Cr ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 4  issue 4

pages  649- 662

publication date 2018-09-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023