Adsorption of 4-chlorophenol from aqueous solution using activated carbon synthesized from aloe vera green wastes
Authors
Abstract:
In this study, activated carbon synthesized from Aloe vera green wastes was used as a sorbent to remove 4-chlorophenol (4-CP) from aqueous solutions. The influence of contact time (0-100 minutes), pH (2-8), adsorbent dosage (1-9 g/l), and initial 4-CP concentration (10-60 mg/l) in batch system was investigated on the sorption. The sorbent was specified using scanning electron microscopy (SEM). Equilibrium for 4-CP sorption was reached at contact time of 40 minutes. The pH of 2 was also found to be the optimum pH in the sorption process. Fitting the experimental data to different kinetic and isotherm models illustrated that the experimental data was well fitted by pseudo-second order kinetic (R2 > 0.98) and Freundlich isotherm (R2 > 0.99) models. According to the results, activated carbon prepared from Aloe vera green wastes is a low-cost effective option for the sorption of 4-CP from aqueous solutions.
similar resources
Adsorption of Malachite Green from Aqueous Solution using Activated Ntezi Clay: Optimization, Isotherm and Kinetic Studies
The adsorption of malachite green from aqueous solution using a local low cost adsorbent, acid activated Ntezi clay, was investigated. The low cost adsorbent was activated with different concentrations of sulphuric acid and the physicochemical properties of the adsorbent were determined and the structural properties were analyzed using XRF and XRD. The adsorption process was studied as a functi...
full textRemoval of chromium (VI) from aqueous solution by adsorption using cousinia eryngioides boiss and activated carbon
Adsorption capacity of Cr (VI) onto cousinia eryngioides boiss, activated carbon was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH, temperature, agitation speed, absorbent dose and particle size. Cr (VI) removal is pH dependent and found to be maximum at pH 2.0. The amounts of Cr (VI) adsorbed increased with increase...
full textAdsorption of nitrate from aqueous solution using activated carbon-supported Fe0, Fe2 (SO4)3, and FeSO4
In this laboratory scale study, impregnated almond shell activated carbon was used as adsorbent to investigate its feasibility for nitrate adsorption from aqueous medium. The effects of activated carbon dosage and contact time have been examined in batch experiments. Experimental data show that impregnated activated carbons by Fe0, Fe2 (SO4)3, and FeSO4 were more effective than virgin almond ac...
full textAdsorption of Copper (II) Ions from Aqueous Solution onto Activated Carbon Prepared from Cane Papyrus
The present study evaluates the suitability ofactivated carbon, prepared from Cane Papyrus, a plant that grows naturally and can be found quite easily, which serves as a biological sorbent for removal of Cu2+ ions from aqueous solutions. Fourier transform infra-red analysis for the activated carbon, prepared fromCane Papyrus confirms the presence of amino (–NH), carbonyl (–C=O), and hydroxyl (...
full textAdsorption of Copper (II) Ions from Aqueous Solution onto Activated Carbon Prepared from Cane Papyrus
The present study evaluates the suitability ofactivated carbon, prepared from Cane Papyrus, a plant that grows naturally and can be found quite easily, which serves as a biological sorbent for removal of Cu2+ ions from aqueous solutions. Fourier transform infra-red analysis for the activated carbon, prepared fromCane Papyrus confirms the presence of amino (–NH), carbonyl (–C=O), and hydroxyl (...
full textAdsorption of Hazardous Methylene Green Dye from Aqueous Solution onto Tin Sulfide Nanoparticles Loaded Activated Carbon: Isotherm and Kinetics Study
In this research, a novel adsorbent, tin sulfide nanoparticles coated on activated carbon [SnS-NP-C] was synthesized by a simple, low cost and efficient procedure for the removal of methylene green from aqueous solutions. Subsequently, this novel material characterization and identification has been completed by different techniques such as TEM, FT-IR, and UV-Vis ...
full textMy Resources
Journal title
volume 3 issue 2
pages 120- 129
publication date 2015-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023