A visible light driven doped TiO2 nanophotocatalyst: Preparation and characterization

Authors

  • M. Asghari Energy Research Institute, University of Kashan, Ghotb-e-Ravandi Ave., Kashan, Iran.
  • M. Feilizadeh Chemical and petroleum Engineering Deportment, Sharif University of Technology, Tehran, Iran.
  • M. Vosoughi Chemical and petroleum Engineering Deportment, Sharif University of Technology, Tehran, Iran.
  • S. M. E. Zakeri Separation Processes Research Group (SPRG), Department of Engineering, University of Kashan, Kashan, Iran.
Abstract:

A useful nanophotocatalyst (La,S-TiO2) was prepared by a sol-gel method and characterized by UV–vis diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), photoluminescence emission spectroscopy (PL) and scanning electron microscopy (FESEM). The results showed that the La,S-TiO2, which calcined at 550 °C, contained only anatase phaseand its crystal size was 23 nm. In addition, the FESEM analysis indicates that the La,S-TiO2 nano particles with diameter of 20 to 25 nm could have a good dispersion in solution. In order to evaluate of activity of the modified synthesized photocatalyst (La,S-TiO2), comparison between modified synthesized TiO2 (La,S-TiO2) and pure synthesized TiO2 for degradation of Methyl Orange was investigated. It was found that the modified synthesized photocatalysis (La,S-TiO2) has much higher photocatalytic activity than undoped TiO2 for the degradation of contamination.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

a visible light driven doped tio2 nanophotocatalyst: preparation and characterization

a useful nanophotocatalyst (la,s-tio2) was prepared by a sol-gel method and characterized by uv–vis diffuse reflectance spectroscopy (drs), x-ray diffraction (xrd), photoluminescence emission spectroscopy (pl) and scanning electron microscopy (fesem). the results showed that the la,s-tio2, which calcined at 550 °c, contained only anatase phaseand its crystal size was 23 nm. in addition, the fes...

full text

Synthesis and characterization of visible light active S-doped TiO2 nanophotocatalyst

S-doped and bare mesoporous TiO2 were prepared using titanium tetraisopropoxide and thiocarbamide as raw materials. Prepared materials were characterized by means of fourier transform infrared spectroscopy FT-IR, thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), UV–Vis absorption spectroscopy, Brunauer–Emmett–Teller (BET) specific surface area and Barrett–Joy...

full text

Synthesis and characterization of visible light active S-doped TiO2 nanophotocatalyst

S-doped and bare mesoporous TiO2 were prepared using titanium tetraisopropoxide and thiocarbamide as raw materials. Prepared materials were characterized by means of fourier transform infrared spectroscopy FT-IR, thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), UV–Vis absorption spectroscopy, Brunauer–Emmett–Teller (BET) specific surface area and Barrett–Joy...

full text

synthesis and characterization of visible light active s-doped tio2 nanophotocatalyst

s-doped and bare mesoporous tio2 were prepared using titanium tetraisopropoxide and thiocarbamide as raw materials. prepared materials were characterized by means of fourier transform infrared spectroscopy ft-ir, thermogravimetry-differential scanning calorimetry (tg-dsc), x-ray diffraction (xrd), uv–vis absorption spectroscopy, brunauer–emmett–teller (bet) specific surface area and barrett–joy...

full text

Fabrication and Characterization of Visible Light active Fe-TiO2 Nanocomposites as Nanophotocatalyst

   In this research Fe-TiO2 nanocomposites with different molar ratios of Fe/Ti were prepared as nano-photocatalyst using a modified Sol-Gel process at ambient temperature. Crystallographic properties of nanocomposites were characterized by X-ray Diffraction (XRD). Surface morphology and mean particle size of nanocomposites were specified by Field Emission Scann...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue Issue 4

pages  329- 335

publication date 2014-10-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023