A survey on the performance of moving bed biofilm reactor and rapid sand filter in wastewater treatment
Authors
Abstract:
Moving bed biofilm reactor (MBBR) is a process in which attached growth is utilized for wastewater treatment. This process does not require sludge recycling or backwash. Activated sludge processes can be promoted to an MBBR by adding media to an aeration tank. Rapid sand filter is a physical method for the removal of total suspended solids (TSS) in advanced wastewater treatment. The purpose of this study was the evaluation of effluent reuse feasibility of MBBR and rapid sand filter in agricultural irrigation. Results showed TSS, biochemical oxygen demand (BOD5), and chemical oxygen demand (COD) concentrations in effluent were 10, 7.7, and 85.75 mg/l, respectively. Removal efficiency of TSS, BOD5, and COD was 98%, 98.8%, and 94.6%, respectively. Furthermore, the value of chemical parameters was less than the standard limitations. Average removal efficiency of total coliform, fecal coliform, and nematode was 100%. Total dissolved solids (TDS) and electrical conductivity (EC) in effluent were 960.5 mg/l and 1200.63 μs/cm, respectively. The Wilcox diagram showed that effluent was in the C3-S1 class, which means effluent quality was appropriate for irrigation. The results showed that effluent quality was completely compatible with the national standards in agricultural irrigation.
similar resources
Moving Bed Biofilm Reactor Performance in Phenol Removal from Wastewater
Background: Phenolic compounds are found in wastewater of many industries such as pulp and paper, textile, petrochemical, oil refineries, production of phenolic resins, plastics, coal furnace, tannery, rubber reclamation plant, fertilizers, coke, paints, rubber, decolorizer, resins, rubber and phenol- formaldehyde resin industries. This study aimed to evaluate Moving Bed Biofil...
full textUpgrading of the Mirmohana Wastewater Treatment Plant in Kish Island, Iran, using a moving bed biofilm reactor
Background and purpose: The performance of full-scale moving bed biofilm reactor (MBBR) was evaluated as an alternative for upgrading of Kish Island Mirmohana wastewater treatment plant. In this study activated sludge process upgrade to MBBR process and different operating parameters were compared. Materials and Methods: Effect of upgrading on different parameters such as organic loading rate (...
full textPerformance Evaluation of Moving Bed Bio Film Reactor in Saline Wastewater Treatment
Background and purpose:Moving Bed Biofilm Reactor is an aerobic attached growth with better biofilm thickness control, lack of plugging and lower head loss. Consequently, this system is greatly used by different wastewater treatment plants. High TDS wastewater produced petrochemical, leather tanning, sea food processing, cannery, pickling and dairy industries. The aim of this study was to evalu...
full textThe Moving Bed Biofilm Reactor
A new biofilm reactor for wastewater treatment, the moving bed biofilm reactor (MBBR), is discussed. A general description of the reactor is given. Results from investigations of different applications (carbonaceous removal, nitrification and nitrogen removal) when used for municipal wastewater treatment, are discussed. Design values are given and it is demonstrated that use of this reactor res...
full textTracking particle size distributions in a moving bed biofilm membrane reactor for treatment of municipal wastewater.
A study has been conducted to investigate the effect of loading rates on membrane fouling in a moving bed biofilm membrane reactor process for municipal wastewater treatment, especially analysing the fate of submicron colloidal particles and their influence on membrane fouling. Two operating conditions defined as low and high organic loading rates were tested where the development and fate of t...
full textApplication of a moving bed biofilm reactor for tertiary ammonia treatment in high temperature industrial wastewater.
This study examines the use of a moving bed biofilm reactor (MBBR) as a tertiary treatment step for ammonia removal in high temperature (35-45°C) effluents, and quantifies different phenotypes of ammonia and nitrite oxidizing bacteria responsible for nitrification at elevated temperatures. Bench scale reactors operating at 35 and 40°C were able to successfully remove greater than 90% of the inf...
full textMy Resources
Journal title
volume 3 issue 3
pages 147- 153
publication date 2015-08-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023