A Review of Electrospun Nanofber Membranes
author
Abstract:
Electrospun nanofber membranes (ENMs) are new generation of membranes with many favorable properties such as high flux and low pressure drop. Although electrospinning has been known for more than a century, its applications in fltration and separation processes are relatively new. Electrospinning has provided the means to produce ultrathin fbers – as thin as a few nanometers – that can be used in preparing membranes with small and defned pore sizes. In addition, due to the small fber diameter ENMs exhibit high surface area to volume ratio, making them suitable adsorption media with enhanced capacity compared with conventional adsorbents. This paper familiarizes the reader with the history and laboratory-scale preparation of ENMs, discusses parameters that influence properties of the fbers and the fnal membranes, and introduces a number of applications in which, ENMs have exhibited superior performances compared to competing conventional processes.
similar resources
Functionalized and Electrospun Polymeric Materials as High-Performance Membranes for Direct Methanol Fuel Cell: A Review
Proton exchange membranes (PEM) for a direct methanol fuel cell (DMFC) have main drawbacks which are methanol permeability, reduced proton conductivity and the cost of the membrane. This paper reviews different polymeric materials such as fluorinated, non-fluorinated, acid-base complex, and composite membranes for DMFC. Currently, nonfluorinated membranes gain a lot of atte...
full textElectrospun Membranes for Desalination and Water/Wastewater Treatment: A Comprehensive Review
Polymeric nanofbers, specifcally fabricated by electrospinning, offer viable means useful for a wide range of applications such as health, energy and environmental issues. However, among the mentioned sectors, desalination and water/wastewater treatment applications have been highlighted during the past decade. This article focuses on the present status and recent develo...
full textPhospholipid nonwoven electrospun membranes.
Nonwoven fibrous membranes were formed from electrospinning lecithin solutions in a single processing step. As the concentration of lecithin increased, the micellar morphology evolved from spherical to cylindrical, and at higher concentrations the cylindrical micelles overlapped and entangled in a fashion similar to polymers in semi-dilute or concentrated solutions. At concentrations above the ...
full textelectrospun nanofibrous membranes as potential adsorbents for textile dye removal-a review
textile wastewaters due to the toxic effects of dyestuffs and other organic compounds and their stability toward light and oxidizing agents have led to an environmental problem. several treatment methods for dye removal have been investigated. membrane process is one of the simplest and most effective methods for dye removal from industrial wastewaters. electrospun nanofibrous membranes have hi...
full textStudies of Electrospun Cellulose Acetate Nanofibrous Membranes
The objective of this work was to study the feasibility of preparing cellulose acetate (CA) nanofibrous membranes by electrospinning with single solvent and their potential applying as affinity membrane. CA solutions in dichloromethane (DCM), formic acid, acetic acid and trifluoroacetic acid (TFA) were electrospun into nonwoven fiber membranes, respectively. The scanning electron microscope (SE...
full textMy Resources
Journal title
volume 3 issue 3
pages 228- 239
publication date 2017-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023