A Review of Air Pollution and Solutions Way Management Related to Ribbed Smoked Sheets (RSS) Production of Community-Level Rubber Cooperatives in Thailand: Smoke, Soot and PAHs particles

In Thailand, RSS chamber of community-level rubber cooperatives can be classified into two models: old and new model, named after the years of their establishment. Hot gas as a heat supply from Para-rubber (PR) wood (Hevea brasiliensis) combustion is used for removing moisture from the natural rubber (NR) sheets. Smoke and soot particles from PR wood burning has effected to the quality of the NR sheet and the pollution in the workplace area and lead to health problems of the worker. Cascade impactors are equipment for measuring the smoke and soot particles size distribution from PR wood combustion. PAHs compounds from PR wood combustion were found 15 different PAHs components (Tekasakul et al., 2005; Furuuchi et al., 2006). Important methods in decreasing smoke and soot particles from combustion of PR wood for rubber smoking chamber are separation equipment and ventilation designed by computational fluid dynamics (CFD) technique. In this article, the separation method is focused on smoke and soot particle collection to maintain the quality of the NR sheet. This equipment is reviewed both indoor and outdoor, for example, an impaction wall, electrostatic precipitator, stainless-wire, etc. This review indicates that the ESP installing between the furnace and the smoking chamber is suitable to eliminate aerosol particles at the rubber smoking industry. In addition, CFD technique reports is aimed at collecting aerosol particles for decreasing smoke and soot particles emission from rubber smoking chamber is presented.