A Numerical Simulation of Vanadium Redox Flow Batteries

Authors

  • A. A. Ranjbar Mechanical Engineering Department, Babol Noshirvani University of Technology, Babol, Iran
  • M. Shakeri Mechanical Engineering Department, Babol Noshirvani University of Technology, Babol, Iran
  • P. Hasannasab Mechanical Engineering Department, Babol Noshirvani University of Technology, Babol, Iran
Abstract:

The recent penetration of renewable sources in the energy system caused a transformation of the needs of the distribution system and amplified the need of energy storage systems to properly balance the electricity grid. Among electrochemical energy storage devices, all vanadium flow batteries are those of the most promising technologies due to their high efficiency, long lifetime, reliability and independence between installed power and storage capacity. Oppositely, the low energy density and the high costs are preventing this technology from spreading at commercial level, even if many are the opportunities of improvement. In this article, a serpentine flow fields are tested using a numerical simulation for the all vanadium redox flow battery. The development of a three dimensional model for the cathode of a vanadium redox flow batteries is presented. The results were discussed in terms of the uniformity of the reactant distribution, overpotential, velocity and state of the charge through the cell.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Chloride supporting electrolytes for all-vanadium redox flow batteries.

This paper examines vanadium chloride solutions as electrolytes for an all-vanadium redox flow battery. The chloride solutions were capable of dissolving more than 2.3 M vanadium at varied valence states and remained stable at 0-50 °C. The improved stability appeared due to the formation of a vanadium dinuclear [V(2)O(3)·4H(2)O](4+) or a dinuclear-chloro complex [V(2)O(3)Cl·3H(2)O](3+) in the s...

full text

Novel catalytic effects of Mn3O4 for all vanadium redox flow batteries.

A new approach for enhancing the electrochemical performance of carbon felt electrodes by employing non-precious metal oxides is designed. The outstanding electro-catalytic activity and mechanical stability of Mn(3)O(4) are advantageous in facilitating the redox reaction of vanadium ions, leading to efficient operation of a vanadium redox flow battery.

full text

Redox Species of Redox Flow Batteries: A Review.

Due to the capricious nature of renewable energy resources, such as wind and solar, large-scale energy storage devices are increasingly required to make the best use of the renewable power. The redox flow battery is considered suitable for large-scale applications due to its modular design, good scalability and flexible operation. The biggest challenge of the redox flow battery is the low energ...

full text

Development of Integrally Molded Bipolar Plates for All-Vanadium Redox Flow Batteries

Chih-Hsun Chang 1, Han-Wen Chou 2, Ning-Yih Hsu 2 and Yong-Song Chen 1,* 1 Advanced Institute of Manufacturing with High-tech Innovations and Department of Mechanical Engineering, National Chung Cheng University, No. 168, University Rd., Minhsiung Township, Chiayi 62102, Taiwan; [email protected] 2 Institute of Nuclear Energy Research, Atomic Energy Council, No. 1000 Wenhua Rd., Jiaan Village...

full text

V5+ degradation of sulfonated Radel membranes for vanadium redox flow batteries.

Insight into the degradation mechanisms of aromatic proton conducting membrane separators for vanadium redox flow batteries (VRFBs) is urgently needed for the development of long lifetime VRFBs. Other than in-cell observations of performance degradation, there is little fundamental evidence on the specific degradation pathways of aromatic ion exchange membranes for VRFBs. Herein we investigated...

full text

Design and development of unit cell and system for vanadium redox flow batteries (V-RFB)

Vanadium redox flow battery (V-RFB) has been attracted by many researches; some are under field testing and demonstration stage, but information on construction, experimental characterization, electrolyte preparation, overall systems under study, etc. are still limited. This paper focus on the technical issues faced and the lessons learnt during the development of unit cell and system for V-RFB...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 32  issue 1

pages  153- 161

publication date 2019-01-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023