A Numerical Modeling for Natural Convection Heat Transfer in Porous Media With Generated Internal Heat Sources
Authors
Abstract:
In this paper a numerical method is used to study the unsteady state natural convection heat transfer within a confined porous media with uniform internal heat generation. The governing equations based on the Darcy model and Bossiness approximations are solved, using the finite difference Alternating Direction Implicit (ADI) method. The developed program was used to simulate natural convection heat transfer within the grain silos, where the respiration of the grains generates heat as a result of metabolism of the products. The results of the analysis show that for short periods (up to 40 days) natural convection is not the dominant heat transfer mechanism and the maximum temperature is on the centerline. In longer periods (greater than two months), fluid recirculation enhances and a cold region near the central axis of the silo is created due to natural convection
similar resources
Natural Convection Heat Transfer within Octagonal Enclosure
The problem of steady, laminar and incompressible natural convection flow in an octagonalenclosure was studied. In this investigation, two horizontal walls were maintained at a constant hightemperature, two vertical walls were kept at a constant low temperature and all inclined walls wereconsidered adiabatic. The enclosure was assumed to be filled with a Bousinessq fluid. The studyincludes comp...
full textHeat Transfer in Porous Media
In this work, the effects of electrical double layer (EDL) near the solid/ liquid interface, on three dimensional heat transfer characteristic and pressure drop of water flow through a rectangular microchannel numerically are investigated. An additional body force originating from the existence of EDL is considered to modify the conventional Navier-stokes and energy equations. These modified eq...
full textAn Investigation into Forced Convection Heat Transfer through Porous Media
Theoretical and experimental investigations of forced convection heat transfer from a heated flat plate embedded in porous media with a constant heat flux had been carried out in the present work. The experimental investigation included a set of experiments carried out to study the effect of Reynolds number and heat flux on the temperature profile and local Nusselt number. The investigation cov...
full textAnalytical and Numerical Study of Natural Convection Heat Transfer in a Vertical Porous Annulus
A study is made of quasi-steady state natural convection in a vertical annular porous layer when the inner wall is heated by a constant heat flux and the other walls are maintaincd adiabatic. On the basis of the Darcy-Oberbeck-Boussinesq equations, the problem is solved analytically in the limit of a long shallow annulus (A » I), where A is the aspect (height-to-gap width) ratio. The analytical...
full textEnhancement of Natural Convection Heat Transfer in Annular Enclosures
Natural convection heat transfer was investigated experimentally in a concentric-cylinders annulus. To enhance the rate of heat transfer, pin fins were installed on the surface of the inner cylinder. Two fin arrangements were employed, namely, staggered and in-line arrangements. The length of the fins varied from 2 to 8 cm and the Rayleigh number Ra changed in the range from 5 x 105 to 5 x 106...
full textCFD analysis of natural convection heat transfer in a square cavity with partitions utilizing Al2O3 nanofluid
In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is assumed that nanofluid is a single phase f...
full textMy Resources
Journal title
volume 4 issue 3
pages 115- 126
publication date 1991-11-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023