A numerical investigation of heat transfer and pressure drop in a novel cylindrical heat sink with helical minichannels

Authors

  • Alireza Falahat Department of Mechanical Engineering,Shahid Chamran University of Ahvaz,Ahvaz, Iran
  • Reza Bahoosh Department of Mechanical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
Abstract:

This study numerically investigated heat transfer and fluid flow characteristics in a novel cylindrical heat sink with helical minichannels for the laminar flow of fluid with temperature-dependent properties. A finite volume method was employed to obtain the solution of governing equations. The effects of helical angle, channel aspect ratio, and Reynolds number, which were regarded as main parameters, were determined. The overall performance of the heat sink was also analyzed on the basis of the thermal performance factor and the augmentation entropy generation number. Results showed that a decrease in the channel helix angle and an increase in the channel aspect ratio and Reynolds number enhance the average heat transfer coefficient and pressure drop in the heat sink. The thermal performance factor and entropy generation minimization method revealed that an aspect ratio of 1.2 enables the best heat sink performance at all helix angles. When the helix angle decreases, performance increases, especially at low aspect ratios.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

A numerical investigation of γ-Al2O3-water nanofluids heat transfer and pressure drop in a shell and tube heat exchanger

The effect of γ-Al2O3 nanoparticles on heat transfer rate, baffle spacing and pressure drop in the shell side of small shell and tube heat exchangers was investigated numerically under turbulent regime. γ-Al2O3-water nanofluids and pure water were used in the shell side and the tube side of heat exchangers, respectively. Since the properties of γ-Al2O3-water nanofluids were variable, they were ...

full text

numerical investigation of heat transfer and pressure drop in a plate heat exchanger with chevron plates

in the present study, turbulent flow in channels of a plate heat exchanger with corrugated chevron plates has been simulated numerically using the commercial cfd package, fluent. unstructured mesh is used for discretizing the computational domain and simple algorithm is utilized to solve the pressure and velocity equations. there is a wide selection of different plate heat exchangers within the...

full text

Numerical Investigation of Heat Transfer and Pressure Drop in a Corrugated Channel

The influence of variation in rib-height to channel-height ratio (e/H) on the heat transfer and pressure drop characteristics inside a channel with corrugated upper and lower plates was investigated numerically in the present study. The governing equations were solved by using finite volume approximations for a wide range of (0.06 < e/H < 0.26) and Reynolds numbers (5400 < Re < 23000), with a m...

full text

Experimental study of convective heat transfer coefficient of MgO nanofluid in a cylindrical microchannel heat sink

Convective heat transfer of MgO-water nanofluid in a microchannel heat sink is experimentally investigated in various concentrations of 0.01, 0.05, 0.1, and 0.6 wt%. The microchannel consisted of 48 parallel rectangular cross section channels with the height of 800 µm, width of 524 µm and length of 52 mm. A well stability duration (ca. 1 month) was resulted by a 180 min ultra-sonication of the ...

full text

a numerical investigation of γ-al2o3-water nanofluids heat transfer and pressure drop in a shell and tube heat exchanger

the effect of γ-al2o3 nanoparticles on heat transfer rate, baffle spacing and pressure drop in the shell side of small shell and tube heat exchangers was investigated numerically under turbulent regime. γ-al2o3-water nanofluids and pure water were used in the shell side and the tube side of heat exchangers, respectively. since the properties of γ-al2o3-water nanofluids were variable, they were ...

full text

Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink

The pressure drop and heat transfer characteristics of a single-phase micro-channel heat sink were investigated both experimentally and numerically. The heat sink was fabricated from oxygen-free copper and fitted with a polycarbonate plastic cover plate. The heat sink consisted of an array of rectangular micro-channels 231 lm wide and 713 lm deep. Deionized water was employed as the cooling liq...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue 1

pages  11- 26

publication date 2018-05-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023