A Novel ±0.5V Ultra High Current Drive and Output Voltage Headroom Current Output Stage with Very High Output Impedance
Authors
Abstract:
A novel ultra-high compliance, low power, very accurate and high output impedance current output stage (COS) with extremely high output current drive capability is proposed in this paper. The principle of operation of this unique structure is discussed, its most important formulas are derived and its outstanding performance is verified by HSPICE simulation in TSMC 0.18µm CMOS, BSIM3, and Level49 technology. This deliberately composed structure utilizes a well combination (for a mutual auto control action) of negative and positive feedbacks to achieve ever demanded merits such as very low power of 150µW, ultra high ratio of 3000 for output current over the bias current (which is selected to be 0.5µA) at low THD of -20dB and very high output impedance of 5GΩ with power supplies of ±0.5V when operating at class AB mode. Simulation results with ±0.5V power supply shows an absolute output voltage dynamic range of 0.9V which interestingly provides the highest yet reported output voltage compliance for Current mode building blocks implemented by regular CMOS technology. Full process, voltage, and temperature variation (PVT) analysis of the circuit is also investigated in order to approve the well robustness of the structure. The transient stepwise response is also done to verify the proposed COS stability.
similar resources
a novel ±۰.۵v ultra high current drive and output voltage headroom current output stage with very high output impedance
a novel ultra-high compliance, low power, very accurate and high output impedance current output stage (cos) with extremely high output current drive capability is proposed in this paper. the principle of operation of this unique structure is discussed, its most important formulas are derived and its outstanding performance is verified by hspice simulation in tsmc 0.18µm cmos, bsim3, and level4...
full textA Novel Very High Performance CMOS Current Mirror with extremely low input and ultra high output resistance
In this paper a novel very high performance current mirror is presented. It favorably benefits from such excellent parameters as: Ultra high output resistance (36.9GΩ), extremely low input resistance (0.0058Ω), low output (~0.18V) and low input voltage (~0.18V) operation, very low power consumption (20μW), very low offset current (1pA), ultra wide current dynamic range (150dB), and ultra high a...
full textA novel ultra-high compliance, high output impedance low power very accurate high performance current mirror
In this paper a novel ultra-high compliance, low power, very accurate and high output impedance current mirror/source is proposed. Deliberately composed elements and a good combination (for a mutual auto control action) of negative and positive feedbacks in the proposed circuit made it unique in gathering ultra-high compliances, high output impedance and high accuracy ever demanded merits. The ...
full textDesigning A Very High Output Resistance Current Source
Abstract— A new technique is proposed in this paper in order to design a current source in bipolar technology with very high output resistance while minimising output capacitance. Such techniques are useful in Electrical Impedance Tomography applications. First of all, D.C. relationships are established. Then, an expression based on the analysis of a simplified equivalent circuit, is formulated...
full textHigh output impedance current-mode multifunction filter using FTFNs
A new current-mode (CM) single input three outputs (SITO) multifunction filter topology is presented, which employs only three FTFNs or OFAs and five passive elements. From this topology, two filter circuits can be derived selecting the passive elements properly. The proposed filter realizes three filter functions simultaneously all at high impedance outputs. No component matching is required a...
full textA Low-Power, High-Speed, Current-Feedback Op-Amp with a Novel Class AB High Current Output Stage
A complementary bipolar low-power, high-speed, current-feedback operational amplifier is described. The amplifier incorporates a new Class AB output stage that enables high output current drive of 100 mA and large voltage swing within 1 V of the supply rails while operating at low quiescent current of 1.5 mA. The amplifier was fabricated in a junction-isolated complementary bipolar process with...
full textMy Resources
Journal title
volume 43 issue 1
pages 45- 53
publication date 2011-04-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023