A New Topology of Bidirectional Buck-Boost dc/dc Converter with Capability of Soft Switching and input Current Ripple Cancellation

Authors

  • E. Babaei Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran.
  • S. Laali Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran.
  • Z. Saadatizadeh Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran.
Abstract:

In this paper, a new bidirectional buck-boost dc-dc converter with capability of soft switching and zero input current ripple is proposed. The coupled inductor is used in the proposed converter to eliminate the input current ripple. In the proposed converter, zero voltage switching (ZVS) and zero current switching (ZCS) can be obtained for the main and auxiliary switches, respectively. In addition, the proposed topology is analyzed in all operating modes and all equations of voltage and current for components are obtained. Moreover, the required conditions for soft switching operation and also achieving zero input current ripple are calculated. Finally, the acuracy performance of the proposed converter is reconfirmed through simulation results in EMTDC/PSCAD software program.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

A New Topology of Embedded Z-H Buck-Boost Converter

In this paper, a new embedded Z-H (EZ-H) buck-boost converter is proposed. In this topology, two identical dc voltage sources are embedded in a LC network in a series connection with the inductors. The proposed converter eliminates the shoot-through (ST) switching state and there is no need for a front-end diode. Other advantages of the proposed topology are having capability of buck and boost ...

full text

Sliding Mode Control of a Bidirectional Buck/Boost DC-DC Converter with Constant Switching Frequency

In this paper, sliding mode control (SMC) for a bidirectional buck/boost DC-DC converter (BDC) with constant frequency in continuous conduction mode (CCM) is discussed. Since the converter is a high-order converter, the reduced-order sliding manifold is exploited. Because of right-half-plan zero (RHPZ) in the converter’s duty ratio to output voltage transfer function, sliding mode current...

full text

Simulation and Experimental Verification of Closed Loop Operation of Buck / Boost DC-DC Converter with Soft Switching

A major problem in an isolated DC/DC converters operating at high switching frequencies is the attendant switching losses in the semiconductor devices. This can be reduced by introducing either zero-voltage switching (ZVS) or zero-current switching (ZCS) of the semiconductor switches. This paper deals with the simulation, design, fabrication and experimental evaluation of a novel soft-switching...

full text

Two Input Positive Dc-dc Buck-boost Converter Topology

A new multiple-input hybrid energy conversion topology is presented. The proposed topology is capable of combining different energy sources with different voltagecurrent characteristics, while achieving low part number and bi-directional operational. The Multiple-input converters have many applications such as grid connected integrated hybrid generation systems, fuel cells, micro grid-based tel...

full text

Simulation of a Zero-Voltage-Switching and Zero-Current-Switching Interleaved Boost And Buck Converter

A novel interleaved boost and buck converter with zero-voltage switching (ZVS) and zero-current switching (ZCS) characteristic is proposed in this paper. By using the interleaved approach, this topology not only decreases the current stress of the main circuit device but also reduces the ripple of the input current and output voltage. Moreover, by establishing the common soft-switching module, ...

full text

Bidirectional Buck-boost Converter with Variable Output Voltage

An increasing number of manufacturing processes rely on ultra-high speed and accuracy machines. Piezoceramic actuators are being utilized as parts of such machines. So far, only linear and switched-capacitor power supplies have been used for driving piezoceramic actuators in such applications. This paper proposes a switch-mode power supply to reduce cost and increase system efficiency. In the p...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 12  issue 2

pages  134- 146

publication date 2016-06

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023