A New Topology for Interline Dynamic Voltage Restorer Based on Direct Three-Phase Converter
Authors
Abstract:
In this paper, a new topology for Interline Dynamic Voltage Restorer (IDVR) is proposed. This topology contains two direct three-phase converters which have been connected together by a common fictitious dc-link. According to the kind of the disturbances, both of the converters can be employed as a rectifier or inverter. The converters receive the required compensation energy from the gird through the direct link which is provided by the dual-proposed switches. Due to the lack of the huge storage elements, the practical prototype of the proposed topology is more economical in comparison with the traditional structure. Moreover, compensating for long time duration is possible due to the unlimited eternal energy which is provided from the grids. The low volume, cost and weight are the additional features of the proposed topology in comparison with traditional types. This topology is capable to compensate both of the balanced and unbalanced disturbances. Furthermore, restoring the deep sags and power outages will be possible with the support from the other grid. Unlike the conventional topologies, the capability of compensation is independent from the power flow and the power factor of each grid. The performance of the proposed IDVR topology is validated by computer simulation with PSCAD/EMTDC software.
similar resources
A New Topology for Dynamic Voltage Restorer Using High Frequency Link
In this paper a new topology for Dynamic Voltage Restorer (DVR) with high frequency link is proposed. This topology is able to compensate different types of voltage disturbances such as voltage sag, voltage swell and voltage harmonics. According to the obtained equations, this topology operates as a controllable current source to charge the series capacitor. Due to using High Frequency Transfor...
full textImproving the Compensation Capacity of Interline Dynamic Voltage Restorer
An interline dynamic voltage restorer (IDVR) is a novel c o m p e n s a t i o n piece of equipment for sag mitigation It is made of several dynamic voltage restorers (DVRs) with a common dc link, here each DVR is connected in series with a distribution feeder. In the sag period, active power is transferred from a feeder to other one and voltage sags with long durations can be mitigated. IDVR co...
full textVoltage Quality Improvement with Neural Network-Based Interline Dynamic Voltage Restorer
Custom power devices such as dynamic voltage restorer (DVR) and DSTATCOM are used to improve the power quality in distribution systems. These devices require real power to compensate the deep voltage sag during sufficient time. An interline DVR (IDVR) consists of several DVRs in different feeders. In this paper, a neural network is proposed to control the IDVR performance to achieve optimal mit...
full textA Novel Technique to Compensate Voltage Sags in Multiline Distribution System - The Interline Dynamic Voltage Restorer
The dynamic voltage restorer (DVR) provides a technically advanced and economical solution to voltage-sag problem. As the voltage-restoration process involves real-power injection into the distribution system, the capability of a particular DVR topology, especially for compensating long-duration voltage sags, depends on the energy storage capacity of the DVR. The interline DVR (IDVR) proposed i...
full textThree-Phase to Single-Phase Matrix Converters: New Topology Based on New Control Method
In this paper, a new topology is proposed for three-phase to single-phase matrix converters, where more voltage levels are produced in the output in comparison with the conventional topologies. In addition, a new control method based on minimum error between the generated and the desired output voltages is proposed for three-phase to single-phase matrix converters. In the proposed control metho...
full textFour Leg Voltage Source Converter based Dynamic Voltage Restorer for Power Quality Improvement in Distribution Networks
This paper deals with digital simulation and control of four leg voltage source converter based Dynamic Voltage Restorer(DVR). The control of DVR that injects a voltage in series with a distribution feeder is presented. DVR is a power electronic controller that can protect sensitive loads from disturbances in supply system. It is observed that DVR can regulate the voltage at the load during an ...
full textMy Resources
Journal title
volume 12 issue 1
pages 52- 64
publication date 2016-03
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023