A New Eight Nodes Brick Finite Element Based on the Strain Approach

Authors

  • Kh Guerraiche Department of Mechanical Engineering, Djelfa University, Batna, Algeria
  • L Belounar NMISSI Laboratory, Biskra University, Biskra, Algeria
  • L Bouzidi NMISSI Laboratory, Biskra University, Biskra, Algeria
Abstract:

In this paper, a new three dimensional brick finite element based on the strain approach is presented with the purpose of identifying the most effective to analyze linear thick and thin plate bending problems. The developed element which has the three essential external degrees of freedom (U, V and W) at each of the eight corner nodes, is used with a modified elasticity matrix in order to satisfy the basic hypotheses of the theory of plates. The displacements field of the developed element is based on assumed functions for the various strains satisfying the compatibility and the equilibrium equations. New and efficient formulations of this element is discussed in detail, and the results of several examples related to thick and thin plate bending in linear analysis are used to demonstrate the effectiveness of the proposed element. The linear analyses using this developed element exhibit an excellent performance over a set of problems.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

A New Stress Based Approach for Nonlinear Finite Element Analysis

This article demonstrates a new approach for nonlinear finite element analysis. The methodology is very suitable and gives very accurate results in linear as well as in nonlinear range of the material behavior. Proposed methodology can be regarded as stress based finite element analysis as it is required to define the stress distribution within the structural body with structural idealization a...

full text

A NEW APPROACH BASED ON FINITE ELEMENT MODEL UPDATING FOR STRUCTURAL DAMAGE IDENTIFICATION

In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...

full text

An Efficient Strain Based Cylindrical Shell Finite Element

The need for compatibility between degrees of freedom of various elements is a major problem encountered in practice during the modeling of complex structures; the problem is generally solved by an additional rotational degree of freedom [1-3]. This present paper investigates possible improvements to the performances of strain based cylindrical shell finite element [4] by introducing an additio...

full text

the effect of a selfregulatory approach on the improvement of efl learners listening comprehension

تاثیر آموزش مهارت خود محوری بر روی ارتقاء مهارت شنیداری زبان آموزان هدف این پژوهش بررسی عوامل موثر در ارتقا مهارت شنیداری زبان آموزان ایرانی بود. در مرحله اول این تحقیق پژوهشگر پس از انجام مصاحبه نود زبان آموز را با استفاده از تست ایلتس انتخاب شدند. برای بررسی عوامل عوامل موثر در ارتقا مهارت شنیداری زبان آموزان ایرانی از دو نوع فیلم ویرایش شده و ویرایش نشده استفاده گردید.برای انجام تح...

A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results

This paper presents a new super-element with twelve degrees of freedom for latticed columns. This elements is developed such that it behaves, with an acceptable approximation, in the same manner as a reference model does. The reference model is constructed by using many Solid elements. The cross section area, moments of inertia, shear coefficient and torsoinal rigidity of the developed new elem...

full text

A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results

This paper presents a new super-element with twelve degrees of freedom for latticed columns. This elements is developed such that it behaves, with an acceptable approximation, in the same manner as a reference model does. The reference model is constructed by using many Solid elements. The cross section area, moments of inertia, shear coefficient and torsoinal rigidity of the developed new elem...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 10  issue 1

pages  186- 199

publication date 2018-03-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023