A New Control Method for Single-Phase Grid-Connected Inverter Using Instantaneous Power Theory

Authors

  • M. Heidari Faculty of Electrical and Computer Engineering, University of Birjand
  • M. Monfared Faculty of Engineering, Ferdowsi University of Mashhad
Abstract:

Because of installation for local consumers and since it is free of all contaminations, connecting photovoltaic cells to the grid via single-phase inverter is significantly on the rise. In this paper, a new simple current control is proposed for a single-phase grid-connected voltage source inverter. Using the PQ theory and modelling a single-phase system as an unbalanced three-phase system, a method is provided for reference current generation. In the proposed method, it is not necessary to generate a fictitious phase for the current signal. Also, the removal of adjusting filter parameters which were used to generate fictitious current signal increases the simplicity of the control system and reduces computational efforts, especially in the presence of distortion in the current. The simulation results confirm that the proposed method provides a precise and fast current control with minimum harmonic distortions.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

A Novel Control Strategy for a Single-phase Grid-connected Power Injection System

In this paper, a novel and simple control strategy, based on state feedback method is suggested to control the power injection system (PIS). The considered PIS is composed of, a DC voltage source, a voltage source inverter (VSI) and a L-C-L filter. The DC source includes the battery source with boosted voltage. The battery can be charged with photovoltaic cells. Since, the grid voltage acts as ...

full text

Optimization of the Lyapunov Based Nonlinear Controller Parameters in a Single-Phase Grid-Connected Inverter

In this paper, optimization of the backstepping controller parameters in a grid-connected single-phase inverter is studied using Imperialist competitive algorithm (ICA), Genetic Algorithm (GA) and Particle swarm optimization (PSO) algorithm. The controller is developed for the system based on state-space averaged model. By selection of a suitable Lyapunov function, stability of the proposed con...

full text

Design of A Single-Phase Transformerless Grid-Connected PV Inverter ‎Considering Reduced Leakage Current and LVRT Grid Codes

A new single-phase transformerless grid-connected PV inverter is presented in this paper. Investigations in transformerless grid-connected PV inverters indicate the existence of the leakage current is directly related to the variable common-mode voltage (CMV), which is presented in detail. On the other hand, in recent years it has become mandatory for the transformerless grid-connected PV inver...

full text

New method of current control for LCL-interfaced grid-connected three phase voltage source inverter

This paper presents an approach for the connection of a photovoltaic generator to the utility grid. A theoretical analysis, modelling, controlling and a simulation of a grid connected photovoltaic system using an output LCL filter are described in detail. In order to reduce the complexity of the system, a linear voltage and current controllers have been developed for a three phase grid connecte...

full text

Control of Grid Connected Pv Inverter Using Lmf Adaptive Method

1Associate Professor and Head,Department of EEE, SKD College of Engineering, Gooty, AP, India 2PG Student, SKD College of Engineering, Gooty, AP, India 3Principal, SKD College of Engineering, Gooty, AP, India ------------------------------------------------------------------------------***------------------------------------------------------------------------------Abstract The objective of thi...

full text

Current mode Controller Design for Single Phase grid connected Inverter Using Proportional Resonant Control Strategy

This paper presents the design of controller based on proportional resonant strategy for single-phase grid connected inverter. The control design is carried out using Sisotool, which is provided in Matlab. By using this tool, users can examine the effects of changing the gain control values to system's transient response and stability, simultaneously. Hence, simplify and speed up the control de...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue 2

pages  105- 116

publication date 2017-12-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023