A laboratory study on mix design to properly resemble a jointed brittle rock

Authors

Abstract:

In this paper attempts have been done to create a mortar with relatively high uniaxial compressive strength (UCS), easy casting, high flexibility, instant hardening, low cost and easy availability. The main use of this material is to physically model the mechanical behavior of jointed rock-like blocks. The effect of four parameters such as joint roughness coefficient (JRC), bridge length (L), bridge angle (γ) and joint inclination (θ) on UCS of non-persistent jointed blocks were studied. For this purpose, 35 cylindrical specimens with a broad range of plaster content (P) and cement content (C) in different ages were tested. In order to increase the strength of blocky specimens, some retarder and lubricant were used. The results showed that using 3 wt. % (Weight percent) lubricant MGAR106 and 0.05 wt. % Retarder decreases water content by 12.5% and increases plaster and cement content of 8.3% and 4.17 % respectively. Consequently, UCS of blocky specimens increased by 284.33%. In order to formulize the effect of P/C content and the age of cylindrical specimens (A) on UCS, Multivariate Non-linear Regression (MNR) and Bayesian Regularized Artificial Neural Network (BRANN) models were deployed. The results showed that BRANN approach can provide more exact predictions of the specimen UCS than MNR model. Moreover, P/C content had more influence on UCS than the specimen age. Finally the UCS tests on blocky specimens indicated that increasing JRC, bridge length and bridge angle increases UCS and it takes its minimum ate joint inclination of 60°. Furthermore, the capability of produced material to model cracking behaviour of jointed blocks was approved.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

a laboratory study on mix design to properly resemble a jointed brittle rock

in this paper attempts have been done to create a mortar with relatively high uniaxial compressive strength (ucs), easy casting, high flexibility, instant hardening, low cost and easy availability. the main use of this material is to physically model the mechanical behavior of jointed rock-like blocks. the effect of four parameters such as joint roughness coefficient (jrc), bridge length (l), b...

full text

Laboratory and Numerical Modelling of a Jointed Rock Mass

Laboratory tests were performed on 54 large size specimens of jointed rock mass under uniaxial loading conditions. Based on this experimental study, a methodology has been suggested to estimate strength and tangent modulus of rock masses through a weakness coefficient. The methodology involves mapping of joints in the field and laboratory testing of intact rock specimens to arrive at rock mass ...

full text

Numerical Study on Crack Propagation in Brittle Jointed Rock Mass Influenced by Fracture Water Pressure

The initiation, propagation, coalescence and failure mode of brittle jointed rock mass influenced by fissure water pressure have always been studied as a hot issue in the society of rock mechanics and engineering. In order to analyze the damage evolution process of jointed rock mass under fracture water pressure, a novel numerical model on the basis of secondary development in fast Lagrangian a...

full text

A Comparison of Underground Opening Support Design Methods in Jointed Rock Mass (TECHNICAL NOTE)

It is of great importance to consider long-term stability of rock mass around the openings of underground structure, during design, construction and operation of the said structures in rock. In this context, three methods namely, empirical, analytical and numerical have been applied to design and analyze the stability of underground infrastructure at the Siah Bisheh Pumping Storage Hydro-Electr...

full text

Study on the Constitutive Model for Jointed Rock Mass

A new elasto-plastic constitutive model for jointed rock mass, which can consider the persistence ratio in different visual angle and anisotropic increase of plastic strain, is proposed. The proposed the yield strength criterion, which is anisotropic, is not only related to friction angle and cohesion of jointed rock masses at the visual angle but also related to the intersection angle between ...

full text

a study on the design of bio-ethanol process from date wastes of sistan and baluchistan province

اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 50  issue 2

pages  201- 210

publication date 2016-12-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023