A Hybrid Control Method for Stable Operation of Active Power Filters in Three-Phase Four-Wire Networks

Authors

  • Amin Barzegar Department of Electrical Engineering, Imam Hossein University, Tehran, Iran
Abstract:

The main goal of this study is the use of Lyapunov’s stability theory to a three-phase four-wire shunt active power filter (SAPF), since this method has been applied effectively to other areas of converter. The dynamic model of the SAPF is first established, after that, a combination of fuzzy tracking control and Lyapunov function is suggested in order to impose a desired transient waveform on the considered three-phase four-wire distribution grid, providing robustness and insensitivity to parameter changes. Furthermore, the suggested control technique guarantees appropriate tracking of the reference current components and simplifies the global control design. The feasibility of the suggested control method is validated using comprehensive simulation studies on a four-wire SAPF in order to compensate for nonlinear and unbalanced grid-connected loads in an electrical power distribution network.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Dc-link Voltage Control Analysis in Three Phase Four Wire Hybrid Active Power Filters

© 2016, IRJET | Impact Factor value: 4.45 | ISO 9001:2008 Certified Journal | Page 1540 DC-LINK VOLTAGE CONTROL ANALYSIS IN THREE PHASE FOUR WIRE HYBRID ACTIVE POWER FILTERS Divyasree1,Sravanthi2 1Student,Department of Electrical And Electronics Engineering ,JNTU College of Engineering Anantapur ,Anantapur,Andhrapradesh 2Student,Department of Electrical And Electronics Engineering ,JNTU College...

full text

An Improved Hybrid Active Power Filter for Power Quality Improvement in Three Phase Four Wire System

This paper presents a hybrid active power filter for a three phase four wire distribution system. The scheme consists of a zigzag transformer, single phase active power filter connected in series with the utility neutral and a coupling capacitor connected in series with a voltage source converter of the active power filter (APF). The addition of coupling capacitor permits the reduction in DC li...

full text

Photovoltaic based three-phase four-wire series hybrid active power filter for power quality improvement

This paper proposes a photovoltaic (PV) and battery interfaced series hybrid active power filter (SHAPF), which consists of series active power filter and an LC shunt passive filter. The main benefits of the proposed system provide the compensation against the voltage harmonics, current harmonics and voltage interruption for the whole day. A series active power filter (SAPF) demands a source of...

full text

Adaptive non-linear control of three-phase four-wire Shunt active power filters for unbalanced and non- linear loads

The problem of controlling three-phase, four-leg shunt active power filters (SAPF) is addressed in presence of nonlinear and/or unbalanced loads. A new control model for four-leg SAPF, taking into account for the electrical grid line impedance, is developed. The control objective is threefold: (i) compensating for the current harmonics and the reactive power absorbed by the nonlinear load; (ii)...

full text

A control strategy for the stable operation of shunt active power filters in power grids

This paper introduces a control strategy for the assessment of SAPF (shunt active power filters) role in the electrical power networks. The proposed control scheme is based on the Lyapunov control theory and defines a stable operating region for the interfaced converter during the integration time with the utility grid. The compensation of instantaneous variations of reference current component...

full text

Improved Structure for Three-Phase Four-Wires Hybrid Active Power Filters

This paper presents a novel three-phase four-wire low power rating flexible hybrid active filter with a power factor, harmonic and neutral currents capability for distribution systems. The passive filter is tuned to compensate the two largest harmonics components and the power factor of the load. A selective algorithm is employed in order to enable the active filter to compensate only the desir...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 06  issue 01

pages  27- 33

publication date 2017-06-04

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023