A Design Package for Single Tooth per Stator Pole Switched Reluctance Motors
Authors
Abstract:
A design package is developed for a single-tooth per stator pole switched reluctance motor, 6/4. The rather simple assumed flux path method is used to estimate the unaligned permeance including the leakage permeances and the effects of shallow slot and tooth taper. The possibility of making rotor tooth width greater than stator tooth width is examined using the developed package. The result appeared to show that the consequent loss of static torque is minimal. This means that it might be possible to improve dynamic performance by incorporating this design feature.
similar resources
A New Skewed-Rotor-Pole Switched Reluctance Motor Design
This paper considers a new switched reluctance motor (SRM) structure aiming at high starting torque with low volume. For some applications such as EVs (Electrical Vehicles), the motor volume and starting torque is a critical point in its design. In many methods, reducing the motor volume causes reduction in starting torque and decreases the motor efficiency. Unlike conventional SRMs, the rotor ...
full textOptimal design of switched reluctance motors
The fundamental theory of the switched reluctance motor is presented with a number of new equations. It is used to show how the practical development of a design calculation should proceed, and this leads to a discussion of physical characteristics required to achieve satisfactory performance and to reduce acoustic noise. The paper makes a few generic observations on the characteristics of succ...
full textEffects of Different Rotor and Stator Constructions on The Performance of Switched Reluctance Motors
This paper is carried out to develop a theoretical model for the simulation of 8/6-pole and 6/4-pole switched reluctance motors and describes the difference of these kinds of motors in dynamic characteristics such as magnetic field energy, magnetic field coenergy, magnitude of By, magnetization losses, steady-state weighted stress tensor torque, mutual inductance and so in performance. As known...
full textA New Energy Optimizing Control Strategy for Switched Reluctance Motors
Abstruct-This paper describes a new and machine-indepenThe SRM is usually voltage controlled or current controlled. dent method to minimize the energy consumption of a speed controlled Switched Reluctance Motor (SRM). The control strategy is to vary the duty cycle of the applied dc voltage in order to obtain the desired speed quickly and when operating in steadystate vary the turn-on angle (ao,...
full textA New Doubly Segmented Structure for Switched Reluctance Motors with High Torque Capability
In this paper, a new magnetic structure for switched reluctance motors is presented. In this structure, both stator and rotor has a segmented topology and there is no magnetic flux path between two stator/rotor segments or any possible combination of them. The proposed segmental structure may be considered with different number of phases as well as different number of segments per phase for any...
full textComputer-optimised smooth-torque current waveforms for switched-reluctance motors
The paper discusses the design of current waveforms for switched-reluctance motors, which give rise to a constant (ripple-free) torque. The waveforms are optimised by computer search techniques, to give the lowest RMS current per phase consistent with producing smooth torque. Furthermore. the waveforms are constrained to be within the converter’s VA rating. Current waveforms and the associated ...
full textMy Resources
Journal title
volume 7 issue 4
pages 197- 206
publication date 1994-11-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023