A design of Rectangular Waveguide TM11 to TE10 Mode Converter for S-band Applications
Authors
Abstract:
A design of a compact, easy to fabricate and applicable structure rectangular waveguide TM11 to TE10 mode converter is presented in this paper. The design procedure of the proposed structure can be divided into two parts in sequence. The beginning one is dedicated to the transformation from TM11 to TEM mode using a central conductor, while the second part is the transformation from TEM to TE10 mode using a dielectric loaded waveguide carrying out 180o phase shift. The proposed structure has the advantage of high efficiency of above 90 %, which are demonstrated in simulation results
similar resources
Dual-Band Evanescent-Mode Substrate Integrated Waveguide Band-pass Filter for WLAN Applications
A new multi-layer substrate integrated waveguide (SIW) structure is developed to design dual-band evanescent-mode band-pass filters (BPFs). Two independent series LC circuits are implemented by incorporating metallic irises in the different layers of the structure. The combination of the metallic irises with capacitive-plates is embedded inside the SIW to independently excite two evane...
full textTriple Band Rectangular Microstrip Antenna for S & C Band Applications
In this paper, triple band rectangular microstrip antenna with two vertical rhombus shaped slot (TBRMA2VRS) is designed and developed for S and C band frequency applications. The triple bands are obtained by etching two rhombus slots on the patch surface. The impedance bandwidth of secondary band is enhanced from 2.06% to8.54% by replacing the two rhombus slots. The radiation patterns measured ...
full textDesign and Implementation of a Constant Frequency Sliding Mode Controller for a Luo Converter
In this study, a robust controller for voltage regulation of the POESLL converter worked in continuous conduction mode is presented. POESLL converter is a DC/DC converter with a high voltage gain. DC/DC converters are used in telecommunication systems, power sources and industrial applications. Owing to the switching operation, the structure of the POESLL converter is highly non-linear. In addi...
full textRectangular Waveguide to Coax Transition Design
question I am frequently asked is, “Why do the antenna dimensions in the W1GHZ Microwave Antenna Book — Online not include the probe dimensions (for the transition from waveguide to coaxial transmission line)?” The answer is that the transition is part of the transmission line, not the antenna, and does not directly affect the performance of an antenna. The transition may be right at the antenn...
full textDesign of Dual-Mode Substrate Integrated Waveguide Band-Pass Filters
Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity; the second is based on the integration of SIW cavity with electromagnetic band gap (EBG); and the third is based on the integration of SIW cavity with complementary split ring resonator (CSRR). The dual-mode SIW cavity is designed to have a...
full textSimulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die
The aim of the present study is to determine the feasibility of making a rectangular twist waveguide used to rotate electromagnetic waves. For this purpose, the process of fabricating an aluminum rectangular twist waveguide was simulated by making use of finite element method and Deform software. The optimum length and angle of the twist die for manufacturing a twist waveguide with inner cross ...
full textMy Resources
Journal title
volume 9 issue 33
pages 0- 0
publication date 2019-08
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023