چشمه نور
Authors: not saved
Abstract:
This article doesn't have abstract
similar resources
خطوط باریکه چشمه نور ایران
This paper describes day-one beamlines of the Iranian Light Source Facility and design concept of powder diffraction and spectromicroscopy beamlines as the most priorities of each synchrotron that cover the research requirements in the fields of physics, chemistry, nano-science, etc. For powder diffraction beamline energy range is 6-30 keV, resolution: 10-4, flux: 1012(ph/s/0.1%B.W.) and spot s...
full textطراحی شبکه برای حلقه انبارش چشمه نور ایران
The Iranian Light Source Facility (ILSF) as a national project is a 3 GeV third generation synchrotron light source facility which provides high energy super bright X-ray for the users. Design of the ILSF storage ring emphasizes an ultra low electron beam emittance (below than 5 nm.rad), beam current of 400 mA, great brightness, stability and reliability which make it competitive in the operati...
full textطراحی الکترومغناطیس‌های حلقه انبارش طرح چشمه نور ایران
Iranian Light Source Facility (ILSF) is a new 3 GeV synchrotron radiation laboratory in the Middle East. The ILSF storage ring (SR) is based on a Five-Bend Achromat lattice, providing a beam emittance of 0.48 nm rad. The ring is consisting of 100 pure dipole, 320 quadrupole and 320 sextupole magnets. In this paper, we present some design features of the SR magnets and discuss their detailed ph...
full textطراحی کاواک 100 مگاهرتز برای حلقه انبارش چشمه نور ایران
Iranian Light Source Facility (ILSF) RF system was conceptually designed based on ILSF requirements for a 3 GeV storage ring and 400 mA beam current at 500 MHz RF frequency. Considering the fact that cavity construction is simpler at 100 MHz and advantages of reducing frequency provided an alternative of 100MHz RF system to be explored for ILSF. After a thorough study on the effect of reducing...
full textطراحی و ساخت پیش تزریق‌گر الکترون چشمه نور ایران
Every synchrotron accelerator requires a pre-injector for primary injection of the electrons into the booster ring. The Iranian Light Source Facility (ILSF) pre-injector is a 150 MeV S-band linear accelerator with a thermionic cathode RF gun. The design of the pre-injector lattice and its beam dynamics calculation results together with the design of RF gun, alpha magnet, quadrupole magnets and ...
full textمنبع تغذیه مغناطیس‌های حلقه افزاینده انرژی طرح چشمه نور ایران
The Iranian Light Source Facility (ILSF) booster main specifications including 250 ms ramp up, 2Hz repetition rate, and quasi-sinusoidal wave shape, up to this point have been the basis for calculations. Each family of magnets including Dipole, Quadrupole and Sextupoles will feed by individual power supply. In order to maintain constant transverse tunes and chromaticity while the beam is accele...
full textMy Resources
Journal title
volume 42 issue 172
pages 91- 110
publication date 1999-11-22
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023