مدلهای برآورد حداکثر دبی میانگین روزانه با برخورداری از ویژگی های فیزیوگرافیک برای حوزه های آبریز غرب ایران
Authors
Abstract:
Flood is one of the catastrophic events that has attracted the hydrologists’ attention. In this research one of the important flood indices, i.e. maximum-daily mean-discharge, was determined for several western Iran watersheds, namely, in the catchments of Gamasiab, Qarasou, Saimare, Kashkan, Sezar and Abshineh. Daily data were prepared from stream-gauging stations and a 30-year concurrent period was selected. Flood frequency analysis was performed using HYFA and TR computer programs and optimum distributions were chosen by goodness of fit tests. Extreme flow values having different return periods of 2, 5, 10, 25, 50, 100, 500 and 1000 years were calculated. Modeling was done with regional analysis using multiple regression technique between maximum-daily mean-discharge and physiographic characteristics of the basins. The most important parameter for the selection of the model was the adjusted coefficient of determination while significant level, standard error and observed discharger vs. computed discharge plot acted as controlling parameters. Finally, different models with different parameters were selected from power, exponential, linear and logarithmic forms. The results showed the power model to be the best among the four types. The main channel length, drainage density and time of concentration were the most effective parameters on flow. After analyzing the errors, it appeared that increasing the return period would cause an increase in the model error. At 1000-year return period, the error reached 32.2%.
similar resources
تعیین مدل مناسب تخمین دبی های میانگین و حداکثر روزانه با استفاده از خصوصیات فیزیوگرافیک برای حوضه آبخیز اترک
Physiographic characteristics of Atrak Watershed described by a number of parameters were used in regression models to estimate maximum daily discharges. These parameters were sub-watershed area, main waterway length, mean waterway slope, mean watershed elevation and mean watershed slope. Based on the results of correlation between the above parameters and their suitability for discharge estima...
full textتعیین مدل مناسب تخمین دبی های میانگین و حداکثر روزانه با استفاده از خصوصیات فیزیوگرافیک برای حوضه آبخیز اترک
Physiographic characteristics of Atrak Watershed described by a number of parameters were used in regression models to estimate maximum daily discharges. These parameters were sub-watershed area, main waterway length, mean waterway slope, mean watershed elevation and mean watershed slope. Based on the results of correlation between the above parameters and their suitability for discharge estima...
full textتعیین مدل مناسب تخمین دبی های میانگین و حداکثر روزانه با استفاده از خصوصیات فیزیوگرافیک برای حوضه آبخیز اترک
کاربرد روش تحلیل منطقه ای، در برآورد دبی جریان به شکل تابعی از خصوصیات آماری حوضه آبخیز در طراحی سازه های آبی و یا مدیریت منابع آب، همواره از اهمیت خاصی برخوردار بوده است. بدین منظور، در این تحقیق مناسب ترین مدل تخمین دبی های میانگین و حداکثر روزانه با استفاده از پارامترهای فیزیوگرافیک، برای حوضه آبخیز اترک بررسی و ارائه گردیده است. این پارامترها شامل مساحت حوضه، طول آبراهه اصلی، ارتفاع میانگین...
full textMy Resources
Journal title
volume 5 issue 2
pages 1- 13
publication date 2001-07
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023