تولید نانوذرات زیرکنات باریوم (BaZrO3) به روش سل-ژل
Authors
Abstract:
In this work, barium zirconate nanoparticles were prepared by sol gel technique in four different conditions. In these conditions zirconium n-propoxide(Zr(OPrn)4) was used as the source of zirconium. Also barium hydroxide (Ba(OH)2.8H2O) and barium acetate (Ba(CH3COO)2) were used as the source of barium.Water and isopropyl alcohol were used as the solvents. The samples were characterized by SEM and XRD. The optimum preparation condition was chosen considering the production time, the sintering temperature, homogeneity and the particle size of obtained nanoparticles. In optimum condition, the BaZrO3 nanoparticles were produced at 100oC with about 80 nm in size.
similar resources
تهیه‌ی نانوذرات گارنت ایتریوم آهن (YIG) به روش سل-ژل و بررسی ویژگی‌های مغناطیسی آن
In this work yttrium iron garnet (Y3Fe5O12 or YIG) nanoparticles have been prepared by sol-gel method, raw materials were dissolved in citric acid and warmed up and stirred to form a gel. Synthesized nanoparticles were characterized, using X-ray diffraction (XRD), FT-IR and TG-DTA methods. Magnetic properties of the nanoparticles were measured, using vibrating sample magnetometer (VSM) and Fara...
full textاثرجانشانی سریوم بر ویژگی‌های ساختاری و مغناطیسی نانوذرات گارنت ایتریوم آهن تهیه‌شده به روش سل- ژل
In this work, Ce-YIG nanoparticles with nominal composition of Y3-xCexFe5O12 (x = 0, 0.1, 0.3, 0.4, 0.5, 0.6, 0.7 and 0.8) were first fabricated by sol-gel method and then the influence of the cerium substitution on the structural and magnetic properties of garnet nanoparticles were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), fourier transform infrared (FT-IR)...
full textمطالعه و مشخصه‌یابیرفتار حرارتی و استحاله ژل به نانوذرات تیتانات باریم فرآوری شده از روش سل-ژل
full text
ساخت نانوذرات اسپینل فلزات انتقالی به روش سل-ژل احتراقی و بررسی خواص مغناطیسی آن‌ها
فریت‌های نرم، مواد مغناطیسی با ساختار اسپینل هستند که دارا بودن خواص بارزی چون مقاومت الکتریکی بسیار بالا، تلفات هیسترزیس ناچیز و تراوایی بالا، این مواد را جهت استفاده در کاربردهای الکترونیکی و پزشکی بسیار مناسب ساخته است. در این پژوهش، نانوپودر فریت نرم با فرمول MFe2O4 که در آن M=Zn, Ni, Cu, Mn است، به روش سل-ژل احتراقی ساخته شد. از نیترات فلزات به عنوان مواد اولیه و از ...
full textتأثیر pH بر خواص ساختاری و مغناطیسی نانوذرات PbFe12O19 ساخته شده به روش سل- ژل
In this research, lead hexaferrites nanoparticles (PbFe12O19) were prepared by sol-gel method. The effect of pH on the structural and magnetic properties of PbFe12O19 was studied. The attempt in this paper was to depict the effect of change in sol-gel pH on the size and morphology of the samples as well as their structural and magnetic properties. Therefore, samples with pH = 1.8, 3, 5, 6, 7, a...
full textMy Resources
Journal title
volume 20 issue 2
pages 375- 384
publication date 2012-10
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023