تخمین غیرتهاجمی مدول الاستیک چشم کاتاراکته شده خرگوش

Authors

  • حسن‌زاده, جواد
  • زرین, محمدرضا
  • جباروند, محمود
  • جعفرزاده, ابراهیم
  • مختاری دیزجی, منیژه
Abstract:

    Although cataract is very common and its detection seems apparently easy especially in the mature cataract, its quantitative description to determine the critical value of diagnosis is too difficult. Non-invasive evaluation of the mechanical properties of eye is hampered by the absence of in-vivo methods for direct assessment of the axial length of eye, lens and cornea. In the present study, firstly, rabbits’ eyes were suggested to create cataract. Then, through a non-invasive method the elastic parameters of the cataract eyes were estimated. 12 male rabbits (3 months old, New Zealand white/Dutch) were chosen in order to create and control the trend of cataract and Lux-metry. After the injection of formalin (20%) to the lens of each rabbit, the results showed that the intensity of the reflected light from the rabbits’ eye had descending trend, and after one hour a mature cataract was confirmed. To assess Δ d, a planning loading system was designed. Ultrasound images of A-mode with the mechanical probe and the frequencies of 8 and 10MHz were taken before and after applying the stress and saved into the computer by median board. With processing its imaging before and after applying the stress the axial length changes of eye ( Δ d) was estimated in in vivo and in vitro conditions. The mean axial length of the cataract eye in vivo and in vitro were 19.71 ±0.32 and 18.81±0.44mm, respectively (P>0.05), which indicated that there was no significant difference between these two conditions. Regarding the applied stress, the mean elastic modulus of the cataract eye in in vivo and in vitro conditions were 84004±17656 and 106864±33346 Pascal respectively (P>0.05), which showed that there was no significant difference between in vivo and in vitro conditions. Results of the present study showed that with applying limited stress, processing the ultrasound images, assessing the amount of strain and assuming an elastic structure for eye, it is possible to estimate its elastic parameters through a complete non-invasive method. Since, in the cataract eye, any change in the elasticity of the lens will change the acoustic properties of the tissue including the velocity, this new method may be useful in the exact determination of the acoustic parameters based on the elastic module and may increase the preciseness of the ultrasound systems. It may further be effective in making the lens after surgery.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

مقدار ایمن داروی بواسیزوماب در چشم خرگوش

هدف: بررسی ایمنی مقادیر متفاوت داروی بواسیزوماب در مایع زجاجیه چشم خرگوش. روش: تعداد 12 چشم از 6 خرگوش تحت تزریق داخل زجاجیه مقادیر 5 ، 5/7 و 10 میلی‌گرم از داروی بواسیزوماب قرار گرفتند. در هر خرگوش در یک چشم بواسیزوماب و در چشم مقابل یا دارونما تزریق شد و یا تنها تحت نظر قرار گرفت. خرگوش‌ها قبل از تزریق و سپس در روزهای 1، 2، 3، 7، 14 و 28 بعد از تزریق تحت معاینه چشم قرار گرفتند. از تمام مو...

full text

مدلی برای تخمین مدول برجهندگی مخلوط آسفالتی بازیافت شده با قیرامولسیون و سیمان

به دلیل خصوصیات مقاومتی پیشرونده در مخلوطهای بازیافت شده با قیرامولسیون و سیمان، مدول برجهندگی آنها تغییر کرده و اصولاً با گذشت زمان افزایش می یابد. بنابراین انتخاب مدول برجهندگی این مخلوطها در طراحی، پیچیده تر از مخلوطهای آسفالت گرم است. تخمین مدول برجهندگی در زمانهای مختلف با استفاده از مقدار آن در ابتدای دوره عمل آوری امکان کنترل باربری این لایه مطابق با طراحی را فراهم می کند. ازطرفی به دلیل ...

full text

تعیین محدوده مدول الاستیک نانوکامپوزیت های پلیمری تقویت شده با نانولوله های کربنی به روش تحلیلی

روش های تحلیلی و المان محدود موجود مقدار مدول الاستیک نانوکامپوزیت ها را بیشتر از مقادیر حاصل از آزمایش تعیین می کنند. در این مقاله یک مدل تئوری تمام پیوسته جهت تعیین یک باند بالا و پایین با تغییرات کم از مدول الاستیسیته برای نانوکامپوزیت های پلیمری ارائه شده است به گونه ای که نتایج آزمایشگاهی همواره در این محدوده قرار بگیرند. بدین منظور معادلات الاستیسیته حاکم بر رفتار زمینه و تقویت کننده در ن...

full text

مدلسازی تغییرات غیر خطی مدول الاستیک تحت بارگذاری متناوب

نتایج تجربی بارگذاری-باربرداری روی فلزات نشان می¬دهد که رفتار ماده حین باربرداری و یا بارگذاری مجدد بعد از تغییر شکل پلاستیک پیچیده و غیرخطی است. ولی اکثر مدل¬ها جهت ساده سازی، از یک مقدار ثابت کاهش یافته برای مدول الاستیک حین باربرداری استفاده کرده اند. در این مقاله با هدف توصیف رفتار غیرخطی باربرداری، یک مدل هایپوالاستیک پیشنهاد گردید. در این مدل با شروع تغییر شکل الاستیک، مدول الاستیک از مقد...

full text

تخمین مدول بستر ریل براساس مشخصات اجزای روسازی بالاستی

مدول بستر ریل یکی از پارامتر های مهم در طراحی بهینه خط است که با توجه به اجزای تشکیل دهنده خط بالاستی تعیین می شود. شناخت رفتار بستر خط راه آهن تحت شرایط مختلف و بر روی زیرسازی با مشخصات پیچیده امری لازم و مفید است. مشخصات فنی و هندسی زیرسازی خط  می تواند بر مدول بستر ریل نقش بسزایی را ایفا کند. مروری بر تحقیقات اخیر در را ه آهن های کشورهای مختلف دلالت بر اهمیت شرایط سیستم حائل ریل برنتایج تحل...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 12  issue 45

pages  163- 172

publication date 2005-06

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

No Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023