تأثیر جایگزینی بخشی ازAP با RDX برخواص مکانیکی، ایمنی و عملکردی پیشرانه های جامد مرکب بر پایه HTPB(علمی-ترویجی)
Authors
Abstract:
The partial replacement of RDX with AP attention of many researchers. In this paper, Firstly reasons of replacing part of AP with RDX expressed and the influence of replacing part of AP with RDX on the mechanical, safety and ballistic properties of composite solid propellant have been studied. Using of nitramines in the propellant formulations cause to change in the mechanical properties such as increase elongation and decrease the young’s modulus and tensile strength. The results shows that replacing AP with RDX cause to improve the Process ability, decrease the burning rate and increase the specific impulse. Of the other effects of replacing AP with RDX can be noted increase temperature and impact sensitivity and too decrease friction and shock Sensitivity.
similar resources
مروری بر روش های بهبود خواص مکانیکی پیشرانه های جامد مرکب بر پایه GAP (علمی-ترویجی)
GAP propellants has good performance due to high energy of this polymer. Unfortunately, due to poor flexibility of GAP polymer and presence of rigid and conjugated azide side groups in its structure, they have poor mechanical properties especially under low temperatures. This article deals with methods of improving mechanical properties of solid composite propellants based on GAP through changi...
full textپیشرانه جامد مرکب پرانرژیNEPE(علمی-ترویجی)
Nitrate ester plasticized polyether (NEPE) is a new generation of composite solid propellants which its high energy content in comparing with conventional formulations, has attracted many researchers in the defense departments, all over the world. First of all an introduction and history and importance of NEPE propellants will be discussed and formulation and combination of propellants componen...
full textاثر مقدار دی‌مریل دی‌ایزوسیانات بر رفتاررئولوژیکی و خواص مکانیکی یک پیشرانه جامد مرکب بر پایه HTPB
Several parameters affecting the rheological and mechanical properties of solid composite propellants. Among them, the molar ratio of isocyanate (NCO) to hydroxyl (OH) groups (R value) is one of the important factors. In this research, the effects of changing in the weight ratio of dimeryl diisocyanate (DDI) curing agent related to hydroxyl terminated polybutadiene investigated on different pr...
full textمطالعه پارامترهای موثر بر خواص مکانیکی پیشرانه جامد مرکب بر پایه HTPB/Al/AP
The success of the composite solid propellant motor depends on the proper stress-strain behavior of the propellant grain against tensile, compression and shear stresses and intensive changes in gravity during launch. In this paper, the effect of formulation components and other parameters affecting mechanical properties (tensile strength, elongation and elastic modulus), and their effects AP/Al...
full textMy Resources
Journal title
volume 10 issue 2
pages 13- 22
publication date 2015-01
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023