بررسی اثر برداشت کلاژن بر میزان استحکام باند برشی چهار سیستم باند عاجی یک جزئی

Authors

  • مانی کاشانی, خسرو
  • عطایی, محمد
  • قاسمی, امیر
  • کسرایی, شاهین
Abstract:

Background and Aim: Achieving adhesion between restorative materials and dentin as a wet and dynamic surface is an important topic in restorative and especially in conservative dentistry. Adhesion of new dentin bonding systems depends on the formation of hybrid layer and micromechanical retention. Nevertheless, an ideal adhesive system has not yet been introduced .Recent studies reveal an increase in bonding stability when the collagen is removed from demineralized dentin surfaces. This study investigates the effect of collagen removal on the shear bond strength of four single bottle dentin bonding systems regarding their structural differences. Materials and Methods: This experimental study was performed on 56 intact human premolar teeth. Smooth surfaces of dentin were prepared on buccal & lingual aspects of teeth, providing 112 dentin surfaces. The dentin surfaces were etched with 37% phosphoric acid for 15 seconds and then rinsed. The specimens were divided into 8 groups. Single bottle adhesive systems [Single Bond (3M), One-Step (Bisco), Prime & Bond NT (Dentsply), and Excite (Vivadent)] were then applied on the dentin surfaces of 4 groups using the wet bonding technique. In the other 4 groups, the demineralized dentin surfaces were treated with a 5.25% solution of sodium hypochlorite for one minute in order to remove the surface organic components. The adhesive systems mentioned before were applied to these 4 groups with the same wet bonding technique. A cylinder of Z100 (3M) dental composite with a 3 mm diameter and 2 mm height was placed on the adhesive covered dentin surface of all groups and light-cured (400 mW/cm2 ,40 sec on each side). The specimens were kept in distilled water at room temperature for one week and then thermocycled for 3000 times (5-55 oc). Shear bond strength of specimens was measured using an Instron (1495) universal mechanical testing machine with cross-head speed of 0.5 mm/minute and chisel form shearing blade. Data were analyzed by Two Way ANOVA and Tukey HSD tests with p<0.05 as the limit of significance. Results: The mean & standard deviation of shear bond strengths (in Mpa unit) of all groups were as follows: One-Step = 19.60 1.83 One-step +H = 19.72 2.01 Single Bond =21.44 3.94 Single Bond +H =18.26 2.85 Prime&Bond NT=26.51 5.02 Prime&Bond NT+H =26.98 5.70 Excite =29.78 3.85 Excite +H =19.07 9.94 Analysis of the results revealed that the use of 5.25% sodium hypochlorite for one minute on the surface of demineralized dentin significantly decreased the shear bond strength of Excite and Single Bond (P0.05). Conclusion: Based on the results of this study, collagen removal from demineralized dentin surface caused a significant decrease in shear bond strength of alcohol & water/alcohol based bonding systems, while the bonding strength of the acetone based systems was not affected. Therefore, the effect of collagen removal on shear bond strength depends on the bonding system applied and its solvent type.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

مقایسه خارج دهانی استحکام برشی باند چهار نوع باندینگ عاجی در دو لایه مختلف از عاج

زمینه و هدف: امروزه استفاده از ترمیم های همرنگ دندان به دلیل تامین زیبایی گسترش چشمگیری یافته است. این ترمیم ها که به کمک عوامل باندینگ به ساختمان مینا و عاج دندان متصل می شوند تحولی عظیم در دندانپزشکی ترمیمی ایجاد کرده اند. البته به علت تفاوت ساختمات عاج سطحی و عمقی، قدرت باند در مناطق مختلف از عمق عاج متفاوت است. لذا این تحقیق با هدف ارزیابی استحکام باد چهار نوع سیستم باندینگ به عاج سطحی و عم...

full text

اثر روش‌های مختلف باندینگ مرطوب بر استحکام باند ریزبرشی عاجی

سابقه و هدف: از آنجائیکه چسبندگی به عاج مرطوب بسیار پیچیده می‌باشد، مطالعه حاضر با هدف مقایسه استحکام باند به عاج مرطوب در دو سیستم چسبنده عاجی نسل پنجم با سه روش متفاوت انجام شد. مواد و روشها: در این مطالعه تجربی، هجده دندان مولر سوم انسانی سالم انتخاب گردیدند. سطوح صاف عاجی با کاغذ سیلیکون کارباید برای ایجاد لایه اسمیر آماده شدند. دندان‌ها به صورت تصادفی به شش گروه (هر گروه 3 دندان) تقسیم و س...

full text

بررسی اثر برداشت الیاف کلاژن بر استحکام باند برشی کامپوزیت به عاج در دو سیستم باندینگ توتال اچ و سلف اچ

Background and Aim: Sodium hypochlorite can remove the organic phase of the demineralized dentin and it produces direct resin bonding with hydroxyapatite crystals. Therefore, the hydrolytic degradation of collagen fibrils which might affect the bonding durability is removed. The aim of this study was to evaluate the effect of collagen fibrils removal by 10% NaOCl on dentin shear bond strength o...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 19  issue None

pages  17- 27

publication date 2006-05

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

No Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023