ارزیابی ریسک بهداشتی مواجهه با ترکیبات آلی فرار (BTEX) در واحد رنگ یک صنعت خودروسازی

Authors

  • امیدی, فریبرز کارشناس ارشد، مرکز تحقیقات عوامل محیطی موثر بر سلامت، دانشگاه علوم پزشکی کرمانشاه، کرمانشاه، ایران
  • دهقانی, فاطمه کارشناس ارشد، گروه مهندسی بهداشت حرفه ای، دانشکده بهداشت، دانشگاه علوم پزشکی تهران، تهران، ایران
  • ذاکریان, سید ابوالفضل دانشیار، گروه مهندسی بهداشت حرفه ای، دانشکده بهداشت، دانشگاه علوم پزشکی تهران، تهران، ایران
  • منصورنیا, محمد علی استادیار، گروه آمار و اپیدمیولوژی، دانشکده بهداشت، دانشگاه علوم پزشکی تهران، تهران، ایران
  • گلبابایی, فریده استاد، گروه مهندسی بهداشت حرفه ای، دانشکده بهداشت، دانشگاه علوم پزشکی تهران، تهران، ایران
Abstract:

Introduction: Adverse effects of volatile organic compounds (VOCs) including general and specific effects like carcinogenic of benzene are well known. The aim of this study was to evaluate occupational exposure to BTEX compounds in the painting unit of an automotive industry and subsequently health risk assessment of exposure to these compounds. Material and Method: This cross-sectional study was conducted in the paint unit of an automotive industry including painting cabin, pre-painting salon and painting salon sections. After analyzing samples, gathered from different sections, by GC-MS, BTEX compound were identified as the main contaminants. In the next step, NIOSH1501 and EPA methods were used to measure and analysis of BTEX and risk assessment, respectively. Result: Findings showed that benzene concentration in painting cabin was higher than occupational exposure limits provided by the Environmental and Occupational Health Center of Iran. Life time cancer risk for benzene per 1000 has been reported10, 3.63 and 1.27in the painting cabin, pre-painting and salon sections, respectively. It was also for ethyl benzene 2.5m 1.8 and 38.0 in the mentioned sections, respectively. The non-cancer risk for benzene and xylene in the painting cabin and pre-painting sections were higher than recommended allowable level. Conclusion: Regarding the high level of cancer risk values obtained for benzene and ethylbenzene in the studied units and also high values of non-cancer risk for benzene and xylene, it is recommended to conduct biological exposure assessmnet of the workers and improve existence control systems using modern engineering control systems.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

ارزیابی ریسک سرطان زایی و غیر سرطان زایی مواجهه با ترکیبات آلی فرار (BTEX) با استفاده از تکنیک شبیه سازی مونت کارلو در یک صنعت فولاد

Introduction: Workers in steel manufacturing companies are extensively exposed to the volatile organic compounds (VOCs). Considering the health effects of these compounds, the purpose of this study was to determine occupational exposure to the BTEX compounds and also evaluation of carcinogenic risk due to benzene and non- carcinogenic risk for BTEX compounds in a steel industry. Material and...

full text

ارزیابی ریسک مواجهه با آلاینده‌های شیمیایی در یک صنعت خودروسازی

Introduction: In recent years, many national and international expert groups have considered specific improvements in risk assessment of chemical pollutants. This study considered to assess the risk of workers exposure to air pollutants in an automobile manufacturing in order to evaluate the health risk assessment due to the inhalation exposure.   Material and Method: To perform this study, ...

full text

ارزیابی ریسک بهداشتی مواجهه با فیوم کل در فرآیندهای مختلف جوشکاری یک صنعت خودروسازی

Introduction: Risk assessment of Toxic or hazardous chemicals enables the Industrial Hygienists to make the appropriate decision in providing healthy work place. This project was conducted in an assembling plant,(4workshop) of an Automobile Industry in IRAN with 2 types of welding operations, including GMAW (CO2 welding) and Spot resistance welding operations. . Method and Materials: Welders...

full text

ارزیابی کمی ریسک مواجهه شغلی با ترکیبات آلی فرار در صنایع شیمیایی وابسته به نفت

چکیده زمینه و هدف: مواجهه‌ی فردی با ترکیبات آلی فرار، می‌تواند اثرات سوئی بر سلامت در محدوده‌ی اثرات غیر سرطان‌زا تا سرطان‌زا ایجادکند. هدف از مطالعه‌ی حاضر، ارزیابی کمّی ریسک مواجهه‌ی شغلی با ترکیبات آلی فرار در صنایع شیمیایی وابسته به نفت می‌باشد. مواد و روش‌ها: دراین مطالعه مقطعی با استفاده از متد استاندارد2549و1501NIOSH نمونه‌برداری وآنالیز هیدرو کربن‌ها، در صنایع شیمیایی وابسته به نفت ان...

full text

ارزیابی ریسک بهداشتی مواجهه شغلی با ترکیبات BTEX جایگاه های توزیع سوخت بنزین شهر مشهد

مقدمه و هدف: افراد بی شماری در سراسر جهان در مشاغل مختلف با مواد شیمیایی متنوعی در تماس می باشند. هدف این مطالعه ارزیابی ریسک بهداشتی مواجهه شغلی با مواد فرار موجود در بنزین در کارکنان شاغل در جایگاه های توزیع سوخت بنزین شهر مشهد به منظور ارائه راهکارهای کنترلی انجام پذیرفت.مواد و روش ها: این مطالعه به صورت مقطعی و در 20 جایگاه توزیع سوخت بنزین واقع در شهر مشهد در 6 ماهه اول 1391 انجام پذیر...

full text

ارزیابی ریسک بهداشتی مواجهه با فیوم کل در فرآیندهای مختلف جوشکاری یک صنعت خودروسازی

مقدمه: ارزیابی ریسک مواد سمی و شیمیایی، مهندسین بهداشت حرفه ای را قادر می سازد که تصمیم گیری های مناسبی را در ارتباط با برنامه ریزی اقدامات کنترلی در محیط کار اتخاذ نمایند. این پروژه در سالن های مونتاژ (4بخش) یکی از صنایع خودروسازی کشور ایران  با دو نوع فرآیند جوشکاری gmaw و نقطه ای مقاومتی به منظور تعیین ریسک مواجهه افراد با فیوم جوشکاری صورت پذیرفته است. روش کار: مواجهه جوشکاران از طریق جمع آ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 8  issue 1

pages  55- 64

publication date 2018-04

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

No Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023