preparation of biodegradable low density polyethylene by starch – urea composition for agricultural applications
Authors
abstract
it has been proven that polyolefins specially low density polyethylene (ldpe), are resistant against degradation and microorganism attacks; thus, one of the most important properties of industrial plastics, is their environmental biodegradability. since plastics are being widely used in agriculture, horticulture and packaging, meeting this requirement becomes increasingly dificult (specially in iran as one of the biggest manufacturers of polyethylene materials).so, attention is focussed on production of biodegradable polyethylene. in this study, some different formulations based on starch and urea for making polyethylenes which are biodegradable in soil and moist media, have been investigated. the compounds produced are injection molded, and tested under natural conditions and their biodegradability has been studied. it has been thus possible to produce a biodegradable low-density polyethylene which is environmentally biodegradable material that is suitable for agriculture and packaging applications.
similar resources
Preparation of Biodegradable Low Density Polyethylene by Starch – Urea Composition for Agricultural Applications
It has been proven that polyolefins specially low density polyethylene (LDPE), are resistant against degradation and microorganism attacks; Thus, one of the most important properties of industrial plastics, is their environmental biodegradability. Since plastics are being widely used in agriculture, horticulture and packaging, meeting this requirement becomes increasingly dificult (speciall...
full textThermo-Oxidation and Biodegradation Study of Low-Density Polyethylene /Starch Films by IR Spectroscopy
This article reports a study of the thermo-oxidation and biodegradation in the soil of low-density polyethylene/starch films (LDPE/starch) by infrared spectroscopy: Films of LDPE/Starch blends of different composition (starch content range from 0 to 15% w/w),were prepared and exposed to thermo-oxidation at different temperatures at 80, 90 and 100°C,and buried in the soil of public dump duri...
full textthermo-oxidation and biodegradation study of low-density polyethylene /starch films by ir spectroscopy
this article reports a study of the thermo-oxidation and biodegradation in the soil of low-density polyethylene/starch films (ldpe/starch) by infrared spectroscopy: films of ldpe/starch blends of different composition (starch content range from 0 to 15% w/w),were prepared and exposed to thermo-oxidation at different temperatures at 80, 90 and 100°c,and buried in the soil of public dump during 3...
full textGrafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
full textCatalytic conversion of waste low density polyethylene into fuel oil
Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...
full textPreparation of High Density Polyethylene/Waste Polyurethane Blends Compatibilized with Polyethylene-Graft-Maleic Anhydride by Radiation
Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation ...
full textMy Resources
Save resource for easier access later
Journal title:
iranian journal of chemistry and chemical engineering (ijcce)Publisher: iranian institute of research and development in chemical industries (irdci)-acecr
ISSN 1021-9986
volume 23
issue 1 2004
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023