sensitivity analysis of water flooding optimization by dynamic optimization

Authors

ali asghar gharesheiklou

sayed ali mousavi-dehghani

abstract

this study concerns the scope to improve water flooding in heterogeneous reservoirs. we used an existing, in-house developed, optimization program consisting of a reservoir simulator in combination with an adjoint-based optimal control algorithm. in particular we aimed to examine the scope for optimization in a two-dimensional horizontal reservoir containing a single high permeable streak, as a function of reservoir and fluid parameters, which we combined in the form of 10 dimensionless parameters. we defined the parameter npvimprovement to indicate the improvement in net present value (npv) that can be achieved through optimization. for initial screening of the effect of the dimensionless parameters, a two-level d-optimal design of experiments (doe) technique was used to obtain a linear response surface model with the aid of 11 water-flooding simulations. as a result 8 dimensionless groups were selected for more detailed analysis, and a full quadratic npvimprovement model was constructed using a three-level d-optimal design using 50 simulations. it should be reminded that all the d-optimal matrix designs were generated by using commands of statistics toolbox of matlab software. finally, pareto charts were plotted to visualize the sensitivity of the model as a function of the dimensionless parameters. based on the present model we can draw the conclusion that the parameters (relative streak length),  (relative streak permeability) and the ratio of water cost and oil price have the largest effect on the scope for obtaining a high value of npvimprovement.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Sensitivity Analysis of Water Flooding Optimization by Dynamic Optimization

This study concerns the scope to improve water flooding in heterogeneous reservoirs. We used an existing, in-house developed, optimization program consisting of a reservoir simulator in combination with an adjoint-based optimal control algorithm. In particular we aimed to examine the scope for optimization in a two-dimensional horizontal reservoir containing a single high permeable streak, ...

full text

solution of security constrained unit commitment problem by a new multi-objective optimization method

چکیده-پخش بار بهینه به عنوان یکی از ابزار زیر بنایی برای تحلیل سیستم های قدرت پیچیده ،برای مدت طولانی مورد بررسی قرار گرفته است.پخش بار بهینه توابع هدف یک سیستم قدرت از جمله تابع هزینه سوخت ،آلودگی ،تلفات را بهینه می کند،و هم زمان قیود سیستم قدرت را نیز برآورده می کند.در کلی ترین حالتopf یک مساله بهینه سازی غیر خطی ،غیر محدب،مقیاس بزرگ،و ایستا می باشد که می تواند شامل متغیرهای کنترلی پیوسته و گ...

Second order sensitivity analysis for shape optimization of continuum structures

This study focuses on the optimization of the plane structure. Sequential quadratic programming (SQP) will be utilized, which is one of the most efficient methods for solving nonlinearly constrained optimization problems. A new formulation for the second order sensitivity analysis of the two-dimensional finite element will be developed. All the second order required derivatives will be calculat...

full text

Equipment capacity optimization of an educational building’s CCHP system by genetic algorithm and sensitivity analysis

Combined cooling, heating, and power (CCHP) systems produce electricity, cooling, and heat due to their high efficiency and low emission. These systems have been widely applied in various building types, such as offices, hotels, hospitals and malls. In this paper, an economic and technical analysis to determine the size and operation of the required gas engine for specific electricity, cooling, ...

full text

An Injection Rate Optimization in a Water Flooding Case Study with an Adaptive Simulated Annealing Techniques

This paper introduces an effective production optimization and a water injection allocation method for oil reservoirs with water injection. In this method, a two-stage adaptive simulated annealing (ASA) is used. A coarse-grid model is made based on average horizon permeability at the beginning iterations of the optimization to search quickly. In the second stage, the fine-grid model is used to ...

full text

My Resources

Save resource for easier access later


Journal title:
iranian journal of chemistry and chemical engineering (ijcce)

Publisher: iranian institute of research and development in chemical industries (irdci)-acecr

ISSN 1021-9986

volume 26

issue 1 2007

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023