adsorption of cr(iii) and mg(ii) from hydrogen peroxide aqueous solution by amberlite ir-120 synthetic resin
Authors
abstract
in concentration of hydrogen peroxide, first, the solution should be quite pure, and then, it concentrate with methods such as vacuum distillation and cooling crystallization, because impurities in the hydrogen peroxide solution in high concentrations are causing decomposition of this substance; that is very dangerous. the purpose of this article is separation of chromium and magnesium cations from 35wt% commercial hydrogen peroxide solution by ion exchange method with strong acid cation resin amberlite ir-120 h+ with styrene divinylbenzene copolymer network and sulfunic acid functional group. in separation of chromium and magnesium, we used batch system and tank equipped with mixer. effect of the amount of resin and contact time on the separation of cation is investigated. the metal ion concentration in the original solution and the metal ions left unsorbed were determined by inductively coupled plasma spectrometry (varian vista icp–aes) technique. in determining the effect of the amount of resin and contact time on separation of cation, amount of chromium and magnesium in hydrogen peroxide solution was 0.1 mg/ml, 0.3 mg/ml and 0.5 mg/ml. experimental results obtained from the separation of chromium and magnesium compared with freundlich, langmuir and jovanovic adsorption isothermal models. results show that these models only in a certain range of concentration, are consistent with experimental results.
similar resources
Adsorption of Cr(III) and Mg(II) from Hydrogen Peroxide Aqueous Solution by Amberlite IR-120 Synthetic Resin
In concentration of hydrogen peroxide, first, the solution should be quite pure, and then, it concentrate with methods such as vacuum distillation and cooling crystallization, because impurities in the hydrogen peroxide solution in high concentrations are causing decomposition of this substance; that is very dangerous. The purpose of this article is separation of chromium and magne...
full textAdsorptive Removal of Al, Zn, Fe, Cr and Pb from Hydrogen Peroxide Solution by IR-120 Cation Exchange Resin
Adsorption of cations Al, Zn, Fe, Cr and Pb from aqueous solution of hydrogen peroxide using IR-120 cation-exchange resin was studied. The removal percentage of the cations was examined by varying experimental conditions (such as pH of the hydrogen peroxide solution, temperature, contact time and dosage of adsorbent) i...
full textadsorptive removal of al, zn, fe, cr and pb from hydrogen peroxide solution by ir-120 cation exchange resin
adsorption of cations al, zn, fe, cr and pb from aqueous solution of hydrogen peroxide using ir-120 cation-exchange resin was studied. the removal percentage of the cations was examined by varying experimental conditions (such as ph of the hydrogen peroxide solution, temperature, contact time and dosage of adsorbent) in a stirred-batch system. under the optimal conditions (ph=1, t=25oc, contact...
full textRemoval of Chromium(III) from the Waste Solution of an Indian Tannery by Amberlite IR 120 Resin
The extraction of chromium(III) from a model waste solution and also from a waste solution of an Indian tannery with Amberlite IR 120 resin is described, and the performance of this resin is compared with other similar resins. The parameters that were optimized include effect of mixing time, pH, loading and elution behaviours of chromium(III) for this resin. Sorption of chromium(III) on Amberli...
full textLead removal from aqueous solution using ostrich feathers modified by hydrogen peroxide
Introduction: Lead is the major toxicant found in industrial effluent that can adversely affect environment and human health. Conventional methods for the removal of this metal from waste waters are often cost prohibitive. This study was conducted to investigate the effect ostrich feathers modified by hydrogen peroxide on lead removal from waste water. Methods: In this descriptive and practical...
full textAdsorption of Lead from Aqueous Solution by Modified Beech Sawdust
Sawdust is now being investigated as an adsorbent to remove contaminants from aqueous solution. Heavy metals can be decreased very effectively with the organic material. In this research, adsorption of Pb (II) onto modified beech sawdust in a batch system was investigated. Sawdust was collected from timber mill of Qom, Iran, and modified with H2SO4 and NaOH. Then, the effe...
full textMy Resources
Save resource for easier access later
Journal title:
iranian journal of chemistry and chemical engineering (ijcce)Publisher: iranian institute of research and development in chemical industries (irdci)-acecr
ISSN 1021-9986
volume 32
issue 2 2013
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023