characterization of sol-gel derived cuo@sio2 nano catalysts towards gas phase reactions

Authors

vahidah homaunmir

sayed hossein tohidi

garnik grigoryan,

abstract

one distinct concentration of copper ions was embedded into the silica matrix to xerogel form using copper source cu(no3)2∙3h2o. the xerogel samples were prepared with using hydrolysis and condensation reactions of tetraethyl ortho-silicate (teos) by the sol-gel method. in this investigation, new molar ratio of h2o/teos was determined to be 11.7. also, the necessary amount of tri-hydrated copper nitrate was added to the solution in such a manner that the concentration of the copper oxide in final solution reach to 10 wt. %. the prepared samples were characterized by thermal gravimetric analysis (tga), transmission electron microscopy (tem), surface area measurement (using bet method) and thermal program reduction (tpr) methods. finally, catalytic behavior of nano-composites was studied towards carbon monoxide (co), nitrogen monoxide (no) oxidation and di-nitrogen oxide (n2o) decomposition reactions.the results were presented the systematic reactivity study of co, no oxidation and n2o decomposition on dispersed copper oxide nano-catalysts over silica supports, in order to determine the ability of these materials to convert carbon monoxide, nitrogen monoxide and di-nitrogen oxide  to harmless species by different reaction paths at different temperatures.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Characterization of Sol-Gel Derived CuO@SiO2 Nano Catalysts towards Gas Phase Reactions

One distinct concentration of copper ions was embedded into the silica matrix to xerogel form using copper source Cu(NO3)2∙3H2O. The xerogel samples were prepared with using hydrolysis and condensation reactions of TetraEthyl Ortho-Silicate (TEOS) by the sol-gel method. In this investigation, new molar ratio of H2</su...

full text

Phase purity of sol-gel-derived hydroxyapatite ceramic.

Calcium oxide was reported in the sol-gel-derived hydroxyapatite (HA) as an unavoidable major impurity. In this study phase purity of HA synthesized by sol-gel route was explored using precursors of calcium nitrate tetrahydrate and triethyl phosphate. Two different drying methods, the fast drying of as-prepared precursors and the slow drying of aged precursors were adopted as major processing v...

full text

Sonosynthesis and characterization of nano ZnO/Montmorillonite nano clay composite via Sol-Gel method

Nano ZnO/ montmorillonite composite were prepared by sol gel method under ultrasonic irradiation from directly mixing montmorillonite nano clay into Zinc gel. The Zn(CH3COO)2.2H2O and montmorillonite nano clay was used as precursor. The zinc acetate was dissolved in DI water and, NH3 (aq) solution was dropped into the zinc solution until pH 9 consequently the zinc gel was produced. The montmori...

full text

Sonosynthesis and characterization of nano ZnO/Montmorillonite nano clay composite via Sol-Gel method

Nano ZnO/ montmorillonite composite were prepared by sol gel method under ultrasonic irradiation from directly mixing montmorillonite nano clay into Zinc gel. The Zn(CH3COO)2.2H2O and montmorillonite nano clay was used as precursor. The zinc acetate was dissolved in DI water and, NH3 (aq) solution was dropped into the zinc solution until pH 9 consequently the zinc gel was produced. The montmori...

full text

Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method

In this paper, titanium dioxide nano-particles were synthesized by sol-gel method in acidic atmosphere. The microstructure, morphology, optical band gap, and hydrophilicity of the sample were studied. Optical band gap of titanium dioxide was probed via Diffuse Reflectance Spectra (DRS) and contact angle (CA) was measured to investigate surface activity. XRD analysis was used to study crys...

full text

My Resources

Save resource for easier access later


Journal title:
iranian journal of chemistry and chemical engineering (ijcce)

Publisher: iranian institute of research and development in chemical industries (irdci)-acecr

ISSN 1021-9986

volume 32

issue 3 2013

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023