numerical study of single phase/two-phase models for nanofluid forced convection and pressure drop in a turbulence pipe flow
Authors
abstract
in this paper, the problem of turbulent forced convection flow of water- alumina nanofluid in a uniformly heated pipe has been thoroughly investigated. in numerical study, single and two-phase models have been used. in single-phase modeling of nanofluid, thermal and flow properties of nanofluid have been considered to be dependent on temperature and volume fraction. effects of volume fraction and reynolds number (3000
similar resources
Numerical Study of Single Phase/Two-Phase Models for Nanofluid Forced Convection and Pressure Drop in a Turbulence Pipe Flow
In this paper, the problem of turbulent forced convection flow of water- alumina nanofluid in a uniformly heated pipe has been thoroughly investigated. In numerical study, single and two-phase models have been used. In single-phase modeling of nanofluid, thermal and flow properties of nanofluid have been considered to be dependent on temperature and volume fraction. Effects of volume fraction a...
full textNumerical study of turbulent forced convection jet flow of nanofluid in a converging sinusoidal channel
Research in convective heat transfer using suspensions of nanometer-sized solid particles in base liquids started only over the past decade. Recent investigations on nanofluid, as such suspensions are often called, indicate that the suspended nanoparticles remarkably change the transport properties and heat transfer characteristics of the suspension. Bending walls can also improve heat transfer...
full textNumerical study of turbulent forced convection jet flow of nanofluid in a converging sinusoidal channel
Research in convective heat transfer using suspensions of nanometer-sized solid particles in base liquids started only over the past decade. Recent investigations on nanofluid, as such suspensions are often called, indicate that the suspended nanoparticles remarkably change the transport properties and heat transfer characteristics of the suspension. Bending walls can also improve heat transfer...
full textnumerical study of turbulent forced convection jet flow of nanofluid in a converging sinusoidal channel
research in convective heat transfer using suspensions of nanometer-sized solid particles in base liquids started only over the past decade. recent investigations on nanofluid, as such suspensions are often called, indicate that the suspended nanoparticles remarkably change the transport properties and heat transfer characteristics of the suspension. bending walls can also improve heat transfer...
full textA NUMERICAL STUDY OF SINGLE-PHASE FORCED CONVECTIVE HEAT TRANSFER WITH FLOW FRICTION IN MICROCHANNELS (RESEARCH NOTE)
Three-dimensional simulations of the single-phase laminar flow and forced convective heat transfer of water in microchannels with small rectangular sections having specific hydraulic diameters and distinct geometric configurations were investigated numerically. The numerical results indicated that the laminar heat transfer was to be dependent upon the aspect ratio and the ratio of the hydraulic...
full textInvestigation of nanoparticles diameter on free convection of Aluminum Oxide-Water nanofluid by single phase and two phase models
In this research, effect of nanoparticles dimeter on free convection of aluminum oxide-water was investigated in a cavity by single phase and two phase models. The range of Rayleigh number is considered 105-107 in volume fractions of 0.01 to 0.03 for nanoparticles with various diameters (25, 33, 50 and 100 nm). Given that the two phase nature of nanofluids, necessity of modeling by this method ...
full textMy Resources
Save resource for easier access later
Journal title:
transport phenomena in nano and micro scalesPublisher: university of sistan and baluchestan, iranian society of mechanical engineers
ISSN 2322-3634
volume 4
issue 1 2016
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023