application of s-transform for fault location in combined overhead line and cable distribution networks

Authors

hamed hasanvand

soodabeh soleymani

behnam feizifar

bashir bakhshideh zad

abstract

this paper illustrates the application of s-transform and continuous wavelet transform (cwt) for fault location in combined overhead line and cable distribution networks. the high frequency transient signals originated by faults are analyzed using s-transform and cwt. the s-transform is found to be applicable in transient based fault location in distribution networks. this technique is an expansion of wavelet transform method and is based on a moving and scalable localizing gaussian window. taking into account this fact that the signal energy of faults has high amplitude around certain frequencies, the fault location can be identified considering the relationship between these frequencies and so-called path characteristic frequencies related to the fault traveling waves. the transient voltage signal energy is calculated using s-transform and cwt. in order to demonstrate the effectiveness of the proposed method, the distribution networks with only overhead lines, as well as a combined system (consisting of the overhead lines and underground cables) have been studied. the ieee 34-bus test distribution network is simulated in emtp-rv software and the relevant s-transform and cwt analyses are carried out in matlab coding environment

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

fault location in power distribution networks using matching algorithm

چکیده رساله/پایان نامه : تاکنون روش‏های متعددی در ارتباط با مکان یابی خطا در شبکه انتقال ارائه شده است. استفاده مستقیم از این روش‏ها در شبکه توزیع به دلایلی همچون وجود انشعاب‏های متعدد، غیر یکنواختی فیدرها (خطوط کابلی، خطوط هوایی، سطح مقطع متفاوت انشعاب ها و تنه اصلی فیدر)، نامتعادلی (عدم جابجا شدگی خطوط، بارهای تک‏فاز و سه فاز)، ثابت نبودن بار و اندازه گیری مقادیر ولتاژ و جریان فقط در ابتدای...

مکان یابی خطا در شبکه های توزیع فشار متوسط دو مداره به روش امپدانسی

Power distribution feeders contains many laterals, sub-laterals, different number of circuit line, load taps, balanced and unbalanced load, different type of lines (cable or overhead), different cross-sections and numerous distribution transformers with different capacities. Moreover, the voltage and current are measured only at the beginning of the feeder. Thus, fault location is very complex....

full text

On the Use of Continuous-wavelet Transform for Fault Location in Distribution Power Networks

The paper illustrates a procedure, based on the continuous-wavelet transform, for the analysis of voltage transients due to line faults and discusses its application to fault location in power distribution networks. The analysis carried out allows us to infer that correlation does exist between some characteristic frequencies of the transformed signal and specific paths in the network covered b...

full text

application and construction of carbon paste modified electrodes developed for determination of metal ions in some real samples

ساخت الکترودهاِی اصلاح شده ِیکِی از چالشهاِی همِیشگِی در دانش شیمِی بوِیژه شیمِی تجزیه مِی باشد ،که با در نظر گرفتن سادگِی ساخت، کاربردی بودن و ارزان بودن روش مِی توان به باارزش بودن چنِین سنسورهاِی پِی برد.آنچه که در ادامه آورده شده به ساخت و کاربرد الکترودهاِی اصلاح شده با استفاده از نانو ذرات در اندازه گِیرِی ولتامترِی آهن وکادمِیم اشاره دارد. کار اول اختصاص دارد به ساخت الکترود خمِیر کربن اصلاح شده با لِیگاند داِ...

15 صفحه اول

Evaluation and Calculation of Overhead Line Impedance in Distribution Networks

Abstract: The determination of the impedance for overhead lines is a critical step before the analysis of distribution feeder such as load flow and short circuit calculation can begin. Because distribution systems consist of single-phase, two-phase, and untransposed three-phase lines serving unbalanced loads, it is necessary to retain the identity of the self and mutual impedance terms of condu...

full text

My Resources

Save resource for easier access later


Journal title:
the modares journal of electrical engineering

Publisher: tarbiat modares university

ISSN 2228-527 X

volume 12

issue 2 2005

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023