preparation and growth of sns thin film deposited by spray pyrolysis technique
Authors
abstract
in this paper thin films of tin sulfide (sns) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. in this work the characteristic of sns thin films investigated. the xrd pattern and optical transmittance of thin films also are discussed. with the change in concentration of thiourea, the physical properties of the thin films are also investigated.
similar resources
Preparation and growth of SnS thin film deposited by spray pyrolysis technique
In this paper thin films of tin sulfide (SnS) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In this work the characteristic of SnS thin films investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...
full textCadmium Oxide Thin Films Deposited by a Simplified Spray Pyrolysis Technique for Optoelectronic Applications
Cadmium oxide thin films were fabricated on glass substrates by a simplified and low cost spray pyrolysis technique at different substrate temperatures. The X-ray diffraction study showed that irrespective of substrate temperature all the films exhibits a preferential orientation along the (1 1 1) plane. The values of crystallite size were found to be in the range 20.72 – 29.6 nm. The perce...
full textPreparation and characterization of nanostructured S and Fe co-doped TiO2 thin film by ultrasonic-assisted spray pyrolysis method
Nanostructured TiO2 and S and Fe co-doped TiO2 thin films with high transparency were prepared on glass substrate through ultrasonic-assisted spray pyrolysis technique. The effects of doping on morphological, optical an...
full textEffect of Film Thickness on the Optical Properties of Las Thin Films Deposited by Spray Pyrolysis Technique
Thin films of LaS were prepared by using spray pyrolysis technique at 270 0 C and thickness were varied by changing the concentration of reactant solution. The films were optically characterized and their variations with film thickness were studies. It was found that thickness can be tuned by varying concentration of reactant solution. The band gap was found to vary between 2.35eV to 2.50eV. Th...
full textSynthesis and electrochemical studies on Cu-TiO2 thin films deposited by spray pyrolysis technique for sensing Uric acid
In this study, we report an effective uric acid (UA) electrochemical biosensor using Cu-TiO2 electrode. UA is a biomedical compound that plays a vital role in human metabolism. The abnormal level of UA leads to several diseases. TiO2 and Cu-TiO2 with various concentrations were deposited on glass substrates by spray pyrolysis technique. The structural study show...
full textStructural and Optical Properties of ZnS Thin Films Deposited by Spray Pyrolysis Technique
ABSTRACT The II-VI group semiconductors are of great importance due to their applications in various opto electronic devices. Among these semiconductor. Zinc sulphide is the most suitable for its utility in opto electronic devices. Zinc Sulphide has been prepared on glass substrate by using Spray Pyrolysis method. The optical properties of these films have been studied in the wavelength range 3...
full textMy Resources
Save resource for easier access later
Journal title:
chemistry of solid materialsPublisher: university of guilan
ISSN
volume 2
issue 1 2015
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023