modeling of asphaltene deposition in pipelines
Authors
abstract
this paper is concerned with asphaltene deposition in fluid flowing through pipelines. brownian diffusion and drag, gravitational, thermophoresis, buoyancy, and shear removal are considered as possible mechanisms in the asphaltene deposition process. the thermo-physical properties of the fluid were obtained from iranian oil fields. a model was used in the pipeline deposition modeling to predict the asphaltene deposition rates under flow conditions. the effects of particle size, temperature gradient, and fluid velocity were studied on asphaltene deposition rate. the results showed that, among the above-mentioned mechanisms, the gravitational and thermophoresis forces played a significant role in the formation of the deposit under the flow conditions. to verify the model, some predictions were compared with the available aerosol deposition data in the literature.
similar resources
MODELING OF ASPHALTENE DEPOSITION IN PIPELINES
This paper is concerned with asphaltene deposition in fluid flowing through pipelines. Brownian diffusion and drag, gravitational, thermophoresis, buoyancy, and shear removal are considered as possible mechanisms in the asphaltene deposition process. The thermo-physical properties of the fluid were obtained from Iranian oil fields. A model was used in the pipeline deposition modeling to predict...
full textAsphaltene Deposition Modeling during Natural Depletion and Developing a New Method for Multiphase Flash Calculation
The specific objective of this paper is to develop a fully implicit compositional simulator for modeling asphaltene deposition during natural depletion. In this study, a mathematical model for asphaltene deposition modeling is presented followed by the solution approach using the fully implicit scheme. A thermodynamic model for asphaltene precipitation and the numerical methods for performing f...
full textAn Investigation of Asphaltene Deposition Mechanisms During Natural Depletion Process by a Two Phase Modeling Using Genetic Algorithm Technique
In this work, the natural depletion process in sandstone and carbonate cores was modeled to investigate the asphaltene deposition mechanisms. A new permeability reduction correlation was proposed based on the Minssieux model that considers a combination of surface deposition, pore throat plugging, and filtration cake mechanisms. The results showed that the filtration cake is a dominant asphalte...
full textAn Investigation on the Effects of Charged Polyacrylamide Injection on Asphaltene Deposition in Porous Media
This study has been investigated, the effects of three different polar polyacrylamides (anionic, cationic, and nonionic) on asphaltene deposition in porous media. All experiments were carried out in various dead oil flow rates (0.2, 0.1 and 0.02 cc/min) and different polymer concentrations (500, 2500, 4000 ppm). The results indicated that asphaltene precipitation was affected by the presence of...
full textA Novel Method for Mitigation of Asphaltene Deposition in the Wellstring
Asphaltene precipitation and deposition is a serious problem in many Iranian fields. The deposited asphaltene results in partial or total blockage of the wellbore and wellstring reducing or completely seizing oil production. This paper studies the asphaltene problem and mitigation methods in wellstring systematically. It presents new approach based on the combination of thermodynam...
full textMy Resources
Save resource for easier access later
Journal title:
journal of petroleum science and technologyPublisher: research institute of petroleum industry (ripi)
ISSN 2251-659X
volume 3
issue 2 2013
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023