artificial neural network models for production of nano-grained structure in aisi 304l stainless steel by predicting thermo-mechanical parameters
Authors
abstract
an artificial neural network (ann) model is developed for the analysis, simulation, and prediction of the austenite reversion in the thermo-mechanical treatment of 304l austenitic stainless steel. the results of the ann model are in good agreement with the experimental data. the model is used to predict an appropriate annealing condition for austenite reversion through the martensite to austenite transformation. this model can also be used as a guide for further grain refining and to improve mechanical properties of the aisi 304l stainless steel.
similar resources
Artificial neural network models for production of nano-grained structure in AISI 304L stainless steel by predicting thermo-mechanical parameters
An artificial neural network (ANN) model is developed for the analysis, simulation, and prediction of the austenite reversion in the thermo-mechanical treatment of 304L austenitic stainless steel. The results of the ANN model are in good agreement with the experimental data. The model is used to predict an appropriate annealing condition for austenite reversion through the martensite to austeni...
full textMartensite phase reversion-induced nano/ ultrafine grained AISI 304L stainless steel with magnificent mechanical properties
Austenitic stainless steels are extensively used in various applications requiring good corrosion resistance and formability. In the current study, the formation of nano/ ultrafine grained austenitic microstructure in a microalloyed AISI 304L stainless steel was investigated by the advanced thermomechanical process of reversion of strain-induced martensite. For this purpose, samples were subjec...
full textmartensite phase reversion-induced nano/ ultrafine grained aisi 304l stainless steel with magnificent mechanical properties
austenitic stainless steels are extensively used in various applications requiring good corrosion resistance and formability. in the current study, the formation of nano/ ultrafine grained austenitic microstructure in a microalloyed aisi 304l stainless steel was investigated by the advanced thermomechanical process of reversion of strain-induced martensite. for this purpose, samples were subjec...
full textThe Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process
In this study, the effects of nitrogen addition on the production of ultrafine/nano grained AISI 201L stainless steel by advanced thermo-mechanical process were investigated. Cast samples were first homogenized at 1200 °C for 4 h, hot-rolled at 1100 °C and finally, solution-annealed at 1150 °C for 2.5 h. Unidirectional and cross multipass cold rolling at 25 °C was carried out to 90% reduction i...
full textEffects of Martensite Reversion Parameters on the Formation of Nano/ultrafine Grain Structure in AISI 304L Stainless Steel
Formation of nano/ultrafine grain structure in AISI 304L austenitic stainless steel through the martensite reversion treatment was studied. The solution annealed specimens were cold rolled up to 95 % thickness reduction at -15°C. The cold-rolled specimens were subjected to reversion annealing treatment at the temperature range of 700-1000 °C for 10–150 min. Microstructural evolutions were analy...
full textMartensitic Transformation in Ultrafine-Grained Stainless Steel AISI 304L Under Monotonic and Cyclic Loading
The monotonic and cyclic deformation behavior of ultrafine-grained metastable austenitic steel AISI 304L, produced by severe plastic deformation, was investigated. Under monotonic loading, the martensitic phase transformation in the ultrafine-grained state is strongly favored. Under cyclic loading, the martensitic transformation behavior is similar to the coarse-grained condition, but the cycli...
full textMy Resources
Save resource for easier access later
Journal title:
international journal of iron & steel society of iranPublisher: iron & steel society of iran
ISSN 1735-4145
volume 6
issue 2 2009
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023