interface and heat-affected zone features of dissimilar welds between aisi 310 austenitic stainless steel and inconel 657

Authors

h. naffakh

m. shamanian

f. ashrafizadeh

abstract

the aim of this paper is to characterize welding of aisi 310 austenitic stainless steel to inconel 657 for use in oil-refining industries. the welds were produced using four types of filler materials; nickel-based alloys designated as inconel 82, a, 617, and 310 ss. the interfaces and heat-affected zones were characterized by optical and scanning electron microscopy. interfaces on the two sides of the joints showed unmixed and heat-affected zones, while a partially melted zone was observed in the interdendritic regions of the haz in inconel 657. the microhardness profile from the base metal to the haz exhibited high hardness in the case of inconel 657 as an indication of α-cr precipitation in the haz of all the filler materials investigated and as the occurrence of precipitation hardening. it was concluded that undesirable regions such as uz, haz, and pmz have the least average size for inconel 82 and 310 ss weldments among the weld metals studied.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657

The aim of this paper is to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 for use in oil-refining industries. The welds were produced using four types of filler materials; nickel-based alloys designated as Inconel 82, A, 617, and 310 SS. The interfaces and heat-affected zones were characterized by optical and scanning electron microscopy. Interfaces on the two sides...

full text

A Comparative Evaluation of Welding Consumables for Dissimilar Welds between 310 Austenitic Stainless Steel and Inconel 657

The current work was carried out to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 nickel-chromium superalloy. The welds were produced using four types of filler materials; the nickel-based corresponding to Inconel 82, Inconel A, Inconel 617 and austenitic stainless steels 310. Of the two joints involved, this paper describes the choice of welding consumables for the...

full text

a comparative evaluation of welding consumables for dissimilar welds between 310 austenitic stainless steel and inconel 657

the current work was carried out to characterize welding of aisi 310 austenitic stainless steel to inconel 657 nickel-chromium superalloy. the welds were produced using four types of filler materials; the nickel-based corresponding to inconel 82, inconel a, inconel 617 and austenitic stainless steels 310. of the two joints involved, this paper describes the choice of welding consumables for the...

full text

AN EVALUATION OF THERMAL STABILITY IN DISSIMILAR WELDS BETWEEN 310 STAINLESS STEEL AND ALLOY 657

Abstract: The investigation is carried out to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 nickel-chromium superalloy. The welds were produced using four types of filler materials: the nickel-based corresponding to Inconel 82, Inconel A, Inconel 617 and austenitic stainless steel 310. This paper describes the effects of aging treatment on the joint. The compara...

full text

Evaluation of microstructure and corrosion behavior of dissimilar laser joint between Inconel 625 and AISI 430 ferritic stainless steel

Dissimilar weld joints between stainless steels and nickel based super alloys are extensively used in petrochemical, gas and oil applications. These joints jave great challenges from metallurgical transformations point of view. In this research, microstructural evolutions and corrosion behavior of laser weld joint between Inconel 625 and AISI 430 ferritic stainless steel were investigated. Ferr...

full text

Evaluation of microstructure and corrosion behavior of dissimilar laser joint between Inconel 625 and AISI 430 ferritic stainless steel

Dissimilar weld joints between stainless steels and nickel based super alloys are extensively used in petrochemical, gas and oil applications. These joints jave great challenges from metallurgical transformations point of view. In this research, microstructural evolutions and corrosion behavior of laser weld joint between Inconel 625 and AISI 430 ferritic stainless steel were investigated. Ferr...

full text

My Resources

Save resource for easier access later


Journal title:
international journal of iron & steel society of iran

Publisher: iron & steel society of iran

ISSN 1735-4145

volume 5

issue 1 2008

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023