characteristic points of stress-strain curve at high temperature
Authors
abstract
determination of critical points on hot stress-strain curve of metals is crucial in thermo-mechanical processes design. in this investigation a mathematical modeling is given to illustrate the behavior of metal during hot deformation processes such as hot rolling. the critical strain for the onset of dynamic recrystallization has been obtained as a function of strain at the maximum stress. in addition, the transition strain from static recrystallization to full metadynamic recrystallization has been presented to form an equation as a function of peak strain, peak stress and steady-state stress. the results of this mathematical modeling are in a good agreement with the experimental data.
similar resources
Characteristic Points of Stress-Strain Curve at High Temperature
Determination of critical points on hot stress-strain curve of metals is crucial in thermo-mechanical processes design. In this investigation a mathematical modeling is given to illustrate the behavior of metal during hot deformation processes such as hot rolling. The critical strain for the onset of dynamic recrystallization has been obtained as a function of strain at the maximum stress. In a...
full textA New Technique based on Strain Energy for Correction of Stress-strain Curve
Tensile stress-strain curve is of high importance in mechanics of materials particularly in numerical simulations of material deformations. The curve is usually obtained by experiment but is limited by necking phenomenon. Engineering stress-strain curve is converted to true stress-strain curve through simple formulas. The conversion, however, is correct up the point of necking. From this point ...
full textComposite Approach to High Strain-Rate Stress-Strain Curve of Reactive Powder Concrete
In this study, we investigate the stress-strain curves of reactive powder concrete (RPC) at high strain rates by using SHPB test, the Burgers’ mechanics model and secant-moduli method. The RPC composites are examined at the age of 10 days containing RPC mortar as the matrix, and three volume concentrations, 1%, 2% and 3%, of steel fiber as the inclusion respectively. Strain rates including 1×10...
full textTensile strain-induced softening of iron at high temperature.
In weakly ferromagnetic materials, already small changes in the atomic configuration triggered by temperature or chemistry can alter the magnetic interactions responsible for the non-random atomic-spin orientation. Different magnetic states, in turn, can give rise to substantially different macroscopic properties. A classical example is iron, which exhibits a great variety of properties as one ...
full textTungsten Behavior at High Temperature and High Stress
Recently reported results on the behaviour of the tungsten under conditions expected in the Neutrino Factory target have strengthened the case for a solid target option for the Neutrino Factory. This paper gives a description of the measurements of the surface motion of tungsten wires, stressed by a pulsed current, using a Laser Doppler Vibrometer in order to measure tungsten properties at high...
full textTungsten material properties at high temperature and high stress
Recently reported results on the behaviour of the tungsten under conditions expected in the Neutrino Factory target have strengthened the case for a solid target option for the Neutrino Factory. This paper gives a description of the measurements of the surface motion of tungsten wires, stressed by a pulsed current, using a Laser Doppler Vibrometer in order to measure tungsten properties at high...
full textMy Resources
Save resource for easier access later
Journal title:
international journal of iron & steel society of iranPublisher: iron & steel society of iran
ISSN 1735-4145
volume 4
issue 1 2007
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023